Ask Experts Questions for FREE Help !
Ask
    jwing's Avatar
    jwing Posts: 1, Reputation: 1
    New Member
     
    #1

    May 31, 2010, 07:37 PM
    Problems with a crafsman briggs & stratton 12.5 engine
    I have an older craftsman mower with a briggs 12.5 hp mottor it had a replaced key for the key way ran grate then wouldn't start key way still looks good but the thing just spitts fire back out the carb any ideas
    Theswagg01's Avatar
    Theswagg01 Posts: 23, Reputation: 1
    New Member
     
    #2

    Jun 1, 2010, 09:41 AM

    You need to pull the flywheel back off and make sure the key has not sheared in half. Sometimes it can look whole but it is not. If it is backfiring then I bet the key is not right. Why did the key need to be replaced anyway? Did you hit a root or something big to stop the motor cold? If not,then something internally went south.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

10 hp Briggs & Stratton engine [ 1 Answers ]

What sort of oil does this engine require?

Briggs & Stratton Engine [ 1 Answers ]

Is this Briggs &Stratton engine a fixed speed 125K05-0186 engine (meaning you cannot control throtle speed.

Engine Swap Problems 11 hp Briggs and Stratton [ 6 Answers ]

I blew an engine on my 2001 Murray Mid Engine Ridder. A friend gave me and older model engine and Ii found problems with connecting the wires. On the engine blown there was one yellow wire fron the coil to the wiring harness and one red wire from the strator to the wiring harness. My problem...

Briggs & Stratton engine manual [ 4 Answers ]

Where can I locate a Briggs & Stratton 16.5 hp Model 313777 repair manual

12.5 briggs&stratton engine [ 1 Answers ]

I have a briggs &strattonengine in my ride on lawn mower the battery won't charge when the engine is running


View more questions Search