Ask Experts Questions for FREE Help !
Ask
    josian76's Avatar
    josian76 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 3, 2008, 12:28 AM
    Position of fuel lines inside the tank of a craftsman gas trimmer/weed eater 25cc
    I Need To Know The Exact Position On The Fuel Lines On A Craftsman Gas Trimmer/weedeater Once The Fuel Lines Are Inside The Fuel Tank How Far Down Do I Push Them In?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Jun 3, 2008, 06:15 AM
    Exact position should not matter too much. You don't want the fuel line to be resting on the bottom of the tank. If it did, there would be the possibility of picking up heavy objects (dirt).

    I'd use within 1/4" of the bottom of the tank.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Weed Eater LT 7000 Gas Tank\Fuel Line [ 2 Answers ]

I recently received a used weed eater lt 7000 and when I tried to clean it up a little I noticed the fuel lines were rotted. The filter was already off inside of the gas tank. Any ideas on how to get a new gas line and the filter back in the gas tank, since I have no idea on how it goes? There was...

Weed Trimmer(weed eater) [ 3 Answers ]

I need step by step help on re-installing a (recoil) starter rope on a weed eater. If by chance you have diagram of how to put it on , I sure would appreciate it , any info will be appreciated ty denise

Installing fuel lnes on my Craftsman weed eater [ 1 Answers ]

I am having trouble figuring out how to install new fuel lines to the carburetor and the primer bulb. Woodrow Smith

RPM's from a 25cc weed eater engine [ 3 Answers ]

I have a weed eater brand,25cc engine and I need to know how many rmp's it has in the max amount and the minimum amount. I would like to know if the brand has anything to do with it or it just depends on how big the engine is. I will take any advice or help that I can get thanks.

Weed Eater trimmer [ 4 Answers ]

The gas motor on my weedeater became unstable in it's running. After trying to readjust the carb I noticed the gas line was cracked and leaking at the tank. So I have now replace the gas line, cap, and cleaned the filter in the gas tank. Also have disassembled the carb and cleaned out the gas...


View more questions Search