Ask Experts Questions for FREE Help !
Ask
    HOMEBUILDER's Avatar
    HOMEBUILDER Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2009, 10:39 AM
    Onan riding mower - engine only runs on choke
    I have a 16 hp sears (onan engine) riding mower - the carb has been rebuilt, the points changed, etc... it starts but only with full choke and then dies, if I try to release the choke it dies and will not start. Can anyone help out with this? What am I missing?
    Thanks
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jun 2, 2009, 11:52 AM

    Your carb needs cleaning. Remove the bowl, dump the fuel in the bowl and actuate the float several times to see if the needele valve will turn the gas flow on and off. Yu might not get it to work even after this so it may need to be rebuilt. I have had some difficluty with Sears mower carb and ended up buying a whole new carb for about $200
    HOMEBUILDER's Avatar
    HOMEBUILDER Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 2, 2009, 12:10 PM
    Quote Originally Posted by ballengerb1 View Post
    Your carb needs cleaning. remove the bowl, dump the fuel in the bowl and actuate the float several times to see if the needele valve will turn the gas flow on and off. Yu might not get it to work even after this so it may need to be rebuilt. I have had some difficluty with Sears mower carb and ended up buying a whole new carb for about $200
    Thanks - but how do I actuate the float needle valve if the bowl cover is removed - it looks like the float needle valve is integrated onto the float?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Jun 2, 2009, 12:14 PM

    With the bowl removed the float will drop down and let fuel dribble into the area where the float once was. Lft the float with your finger and the flow of fuel should stop.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Riding Mower engine surges [ 3 Answers ]

Craftsman riding mower is around 7 years old. Engine, not mower, surges in idle and while mowing; replaced plug, gas line, gas filter, filled w/new gas, & air filter. What else can I do?

My lawn mower engine runs for only about 5 seconds [ 1 Answers ]

My lawn mower engine only runs about 5 seconds

Riding Mower B&S runs, but under load boggs down [ 1 Answers ]

Good day, Have a Murry 42" 18.0 Briggs & stratton engine. Now the engine does not like to start with a choke. When engaging the blades the engine boggs down then builds back up. When cutting any grass it runs 1/3 normal speed (engine). I checked for blocked air intake and changed fuel. In off,...

Riding mower engine problem [ 2 Answers ]

I have a craftsman mower model number 917.258980 20.5 hp. My problem is that it will not start without the help of starting fluid. But right after the shot of fluid is exhausted it dies. The mower turns over good and yes I have gas in it. The fuel is getting to the carburetor, as I was able to...

Snapper Mower, riding, B&Stranton 9hp Starts, runs, dies... [ 2 Answers ]

So I was feeling pretty snappy from having got my mom's push mower running. She had put a new spark plug in, I gapped it, and drained fuel, took of round thingy with a float in it and washed a screw with hole (in gas). She is mowing with it now! Great... But her riding mower, snapper, with 9...

View more questions Search