How do I tell when the mower will not go in gear if it's the Transmission or another problem, when it quit working I found the belt was off, I put the belt back on it still doesn't work. Murray 10.5hp 30in cut model # 309008x92A.
Add your answer here.
Check out some similar questions!
Murray 12hp Riding Mower Transmission Won't Engage [ 6 Answers ]
I have a Murray / Tecumseh 12hp ovxl120-202046d that suddenly is no longer engaging in any gear. Also, the brake no longer appears to be working. I can put the mower in gear, engage the parking brake and the mower will roll as if nothing is engaged. The mower will start properly, I can engage...
Murray Riding mower [ 5 Answers ]
Murray select wide body. I need a electrical system diagram. Someone before I got it put an 18 twin on it .It came out with a 16.5 on it :confused:
Murray riding mower [ 4 Answers ]
I have a Murray Model 42910x92a riding mower. I started it the other day and it ran for about 2 minutes then died. I tried to start it again, but the starter would not turn over; there was no "click" of the solenoid. I checked the battery, has plenty of juice. I bridged the solenoid and the...
Mower Replacement Belt, Old Murray Riding Mower [ 2 Answers ]
I have a model 38618X92E. I am looking for a manual or parts catalogue for this model so I can find the proper replacement belt. Thanks.
AYP Riding Mower Transmission [ 1 Answers ]
Hi; I have 42" deck AYP riding mower. Today it started jerking when putting it in gear and not wanting to go forward unless I hold the brake slightly depressed. I took the back plate off and noticed that the drive pulley was real wobbbly. Is this cause by a bad bearing or shim and is it repairable...
View more questions Search