Ask Experts Questions for FREE Help !
Ask
    omawcs's Avatar
    omawcs Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 23, 2007, 01:57 PM
    Murray riding mower switch
    Changed ignition switch,still won't cut off,need diagram about the proper wirering..
    fwrfwr's Avatar
    fwrfwr Posts: 21, Reputation: -2
    New Member
     
    #2

    Mar 27, 2007, 08:50 AM
    Quote Originally Posted by omawcs
    Changed ignition switch,still wont cut off,need diagram about the proper wirering..
    Also trying to find schematics on murray ign switch.. seems none out there.
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
     
    #3

    Mar 27, 2007, 08:04 PM
    Find the post on the back that when the key is in the "off" position it is going to ground. The coil wire (small) coming from under the shroud goes there.

    Don

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray Riding Mower won't move [ 10 Answers ]

My Murray Riding Mower is 7 yrs old. When I last started the mower it started but does not move forward or backward. Can anyone asvise what could be wrong, e.g. transmission and is it worth repairing, or could it be repaired.

Old Murray riding mower [ 8 Answers ]

I bought an old Murray riding mower last year. I'm not sure what year it is, but here is my problem: One of the rear tires has a flat, instead of loading up the whole mower in the back of the truck, I wouldm like to remove the wheel. I removed the holding pin and the washer from the outside of the...

Murray Riding Mower Does not Start [ 3 Answers ]

It started having a little problem starting lawn mower. It started fine when it is cold, but once it heats up I cannot restart. I had to wait until it cool down. First I thought solenoid switch is bad. I did replaced solenoid switch. It did not help. This year I was trying to start, but it...

Murray Riding Mower [ 1 Answers ]

I bought a used Murray riding mower with a 40" deck. I want to add a mulching kit but can't seem to find one. Does anyone know if there are any interchangeable parts that will fit this mower?

Murray Riding Mower [ 1 Answers ]

I have a murray riding mower that I purchased in August of 1991. Apparently I need a new transaxle because it will not go in gear at all. The part # in the book is Dana model 4450-1 which I have been unable to locate, the only reference I have come across for the part says that it has been...


View more questions Search