Ask Experts Questions for FREE Help !
Ask
    K7eiko's Avatar
    K7eiko Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 29, 2012, 10:57 AM
    Mower keeps stalling out on a right hand tilt
    Have a 2005 Craftsman 1000 with an 18 hp Briggs and Stratton engine. Can't figure where to start to resolve my problem. Once I hand push the mower to a level or uphill situation, I can start the engine and it will run until I again get into a right hand tilt position. Checked and ordered a seat "kill" switch because the wings that secure it to plate have become untenable. But I don't think that is really the problem here though, I was able to run the mower with the switch depressed in my hand. Still at a loss to resolve the stalling problem. Help!
    Scleros's Avatar
    Scleros Posts: 2,165, Reputation: 262
    Hardware Expert
     
    #2

    Mar 29, 2012, 02:57 PM
    How much fuel is in the tank and is there any debris in the tank?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #3

    Mar 29, 2012, 08:08 PM
    Scleros could b onto something but I'd also continue looking at the kill switch. There is freequently enough wire in the harness to detact the switch and hold it closed while riding on this hill, that would tell you if it's the switch or the mount. In the meantime, top off the tank.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is hand twitching a sign that something is wrong with my hand or arm? [ 1 Answers ]

For the past two days, my left hand has been twitching uncontrollably off and on, and I don't know what could be causing it. I've never had it happen before and I just thought it was weird because it was just out of the blue. Is this normal and am I just being too paranoid?

Scotts riding mower 17hp 42 inch cut keeps stalling [ 1 Answers ]

I own a 5 year old scotts riding mower 17HP 42 inc. The mower keeps stalling when I engage the lever for cutting operation. It usually takes me about 5-10 minutes to get it running then seems to be OK. There seems to be a problem with the clutch pedal, but I don't know if this is the problem. I...

1930's antique hand push mower [ 0 Answers ]

I have an old 1930's hand push mower, that still works great, it was produced by "The crowe end works Ltd Marrickville NSW" and its called "The Rex" I would like to know what its value is.

Stalling mower [ 1 Answers ]

I have a wizard riding mower 17 hp briggs. Having stalling problems when let out Clutch/brake pedal or engaging blades. Worked fine last year.


View more questions Search