Ask Experts Questions for FREE Help !
Ask
    r_rothzen's Avatar
    r_rothzen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2007, 08:45 PM
    Montgomery Ward 18/46 Power Kraft BELT Number
    I have a 1995 Power Kraft riding lawn mower that I purchased from Montgomery Ward. It is an 18 horse with 46 inch cutting deck with 3 blades. I am in need of a belt to run the 3 blades but can not find a number for the belt or a number for the tractor to try and cross reference it. It is a hydrostat. Also not for sure on how the belt goes around the pulleys. Any help would be greatly appreciated.
    Thanks,
    Ron
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Aug 1, 2007, 02:56 AM
    If You Have The Old Belt, Take It To Your Nearest Small Engine Shop And See If They Can Look It Up In The Parts Book, Or Measure The Belt And Match It Up. Best Of Luck.
    P.s.
    This Unit Was Built By Mtd , I Think.
    izzyburnt's Avatar
    izzyburnt Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Apr 5, 2012, 07:33 PM
    I use either a 99 or 100 inch 5/8 belt on mine
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Montgomery Ward lawn tractor mystery! [ 5 Answers ]

I need help identifying this machine. The oddity is this: two data stickers on this machine, one has the serial number field filled by 361, the other sticker has the model number G/L3352A, or GIL3352A. The model number sticker is on the front blade mount, and the serial number sticker is on the...

Montgomery Ward riding mower won't start [ 13 Answers ]

Hello, I am new to the site. Hopefully this isn't a repeat post. I thought that I had posted before, but I can't find it. Nonetheless, here is the question. I have an older year Montgomery Ward ridding lawn mower with a B&G 12.5 I/C engine. Last season it went out on me at the end of the season. I...

Squeaky Montgomery Ward clothes dryer [ 1 Answers ]

Our 16-year-old Montgomery Ward dryer, Signature 2000 model # FFT-7589-80B, has developed a very high-pitched squeak that starts a minute or so after we start it up. I have replaced the felt pad with spacers (between the door and the drum) to no avail. The front panel is a solid panel, and the...

Montgomery Ward riding mower rebuild [ 3 Answers ]

I have a Montgomery Ward riding lawn mower with a PTO shaft driven roto-tiller attachment. It is a 16 Twin 656 cc. Model 33420.. I am trying to finding service manual(s) so I can rebuild it. The engine runs but the wiring has been cut spliced and or removed.

Old Montgomery Ward riding mower [ 1 Answers ]

We are trying to fix this old riding mower that we just acquired and we can't seem to figure out how the mower deck goes on. If anyone can give detailed instructions that would be great.

View more questions Search