Ask Experts Questions for FREE Help !
Ask
    fivewallace's Avatar
    fivewallace Posts: 1, Reputation: 1
    New Member
     
    #1

    May 13, 2008, 05:53 PM
    Location of fuse box on Troy-BIlt Super Bronco Riding Mower
    WHere is the fuse box located on the Troy-BIlt Super Bronco riding mower? THe lawnmower was turned off while in was in forward gear and now it will not start. Any ideas of what might be wrong? Thank you.
    d1allen's Avatar
    d1allen Posts: 3, Reputation: 0
    New Member
     
    #2

    May 14, 2008, 12:15 PM
    On a Troy Bilt Pony mower the fuse is located under the side cover on the right side sitting on the seat. It is on the upper left side next to the switch.
    Miata222's Avatar
    Miata222 Posts: 1, Reputation: 1
    New Member
     
    #3

    Nov 28, 2009, 08:30 AM
    Mine was in the frame opening above the left rear tire,
    GDU, OKC
    TOTIREDTOPUSH's Avatar
    TOTIREDTOPUSH Posts: 2, Reputation: 1
    New Member
     
    #4

    Mar 20, 2012, 04:37 PM
    My bronco riding mower,I was mowing the grass ,stopped to refuel,how it will not start,have headlights,but engine will not crank,looked for fuses,found non,folloed the starting seq.can I get a wiring and digram of where the safety switches are located .michael
    chrisw22's Avatar
    chrisw22 Posts: 3, Reputation: 1
    New Member
     
    #5

    Mar 23, 2012, 10:23 AM
    The use for a bronco is next to the gas tank it only has one fuse
    TOTIREDTOPUSH's Avatar
    TOTIREDTOPUSH Posts: 2, Reputation: 1
    New Member
     
    #6

    Apr 4, 2012, 03:03 PM
    I had to call the troy built 1-800 number,the tech guy told me where everything was at, THE FUSE and STARTER RELAY are both in the battery compartment,
    Remove the battey ,the fuse is on the back side of the compartment right in front of you,if fuse is good,and mower engine still will not turn over,take your auto jumper cables and carefully connect the pos.cable and the other end bump the pos.(post with red wire)on the starter it will spark and engine should turn over.if it does,
    Your starter relay is bad(this is what is wrong with mine)it's a pain in the back side to take off!

    Follow the pos. red battery cable in the battery compartment,it goes straight to the relay,if you ever had or knew someone that had a ford,the starter relay looks the same..
    There are two bolts that you have to remove they come off from the outside on the back wall(carefull one of the bolts also hold the negative. Barrery end to the body

    I called around and everyone said they had to order it,found a place calledPARTS TREE 512-288-4355, 21.80 and had 12 on stock,they carry a wide range of parts for a lot brands,the are in austin.

    Hope this helps someone out, michael
    coolgotu's Avatar
    coolgotu Posts: 1, Reputation: 1
    New Member
     
    #7

    Aug 29, 2018, 08:35 AM
    I have been a mechanic for over 50 years hvac,boat cars and I have never seen anything so stupid as what I saw to remove this relay
    A 300 hundred horse power compressor is easier to work on so is a race car. How did troy built let this get by them
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #8

    Aug 31, 2018, 07:22 AM
    Stupid question, still in forward gear?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need to put a new belt on my mower deck. It is a troy bilt super bronco. [ 4 Answers ]

I need to run a new belt on my mower deck. It is a troy bilt super bronco with a 42" deck.

Troy Bilt Riding MOwer (Bronco) [ 4 Answers ]

Hi, I have a troy bilt riding lawn mower (42 inches deck) bought last year. I am looking to put a bagger with chute on it. Do you know if a Craftsman bagger ( 6 Bushel 2 - Bin Hard Bagger for 42" Deck ) will fit? I know all most of the available mowers in the market are built by MTD, do the...

Troy bilt riding mower won't cut [ 2 Answers ]

I have a troy bilt riding lawn mower and The blades won't spin not sure what is wrong

Troy Bilt Super Bronco [ 1 Answers ]

Looking for a diagram of a Super Bronco deck. Had to replace a tension spring but don't think is in the correct place. The diagram in the manual isn't too clear on the springs placement. The belt is very loose and doesn't have the cutting power it used to.

Troy Bilt Super Bronco main drive [ 1 Answers ]

I have a Troy Bilt Super Bronco 42" deck rider, It has the veri-drive I believe it is called. Yesterday while mowing I had the drive pedal engaged and the mower just stopped and it started smoking from underneath the mower and wouldn't move in forward or reverse. It will go into gear(forw. And Rev)...


View more questions Search