Ask Experts Questions for FREE Help !
Ask
    rickh69's Avatar
    rickh69 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 16, 2009, 06:42 PM
    Kohler firing problems
    OK I am a mechanic I have unhooked kill wire from magneto.flywheel key and magnets are fine and clean.. air gap is 10 and I have no fire. I performed three test with multimeter test 1 ohms between bolts on coil and negative terminal of battery.. it has 0 ohms... test 2 from spark plug wire to bolts on mag and I get no reading at all... test 3 from kill terminal on mag to negative battery cable and I get 0 ohms... I bought a new ign mag but let someone else put it on and they touched a 12 volt wire to the kill terminal would this destroy it if so I need another...
    rickh69's Avatar
    rickh69 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Apr 16, 2009, 07:12 PM
    Quote Originally Posted by rickh69 View Post
    ok i am a mechanic i have unhooked kill wire from electronic ign module.flywheel key and magnets are fine and clean..air gap is 10 and i have no fire. i performed three test with multimeter test 1 ohms between bolts on module and neg terminal of battery..it has 0 ohms...test 2 from spark plug wire to bolts on module and i get no reading at all....test 3 from kill terminal on module to neg battery cable and i get 0 ohms...i bought a new ign module but let someone else put it on and they touched a 12 volt wire to the kill terminal would this destroy it if so i need another...
    Need to correct words used by mag or magneto I should have used electronic ign module
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Firing trouble [ 2 Answers ]

:mad: I have a Tippmann A-5 when ever I pull the trigger the gun fires crazly. I don't know there's a problem with the co2 or a trigger problem help someone help

Firing diagram [ 2 Answers ]

I am looking for the firing diagram for a 1979 Dodge Ram pickup. Changed the sparkplugs and wires, but wires must be crossed because it is not running good.

Firing [ 2 Answers ]

I got fired today from a long term job. How do I explain this at interviews. The labor board is going to be checking into the company. Also how do I get a list of the jobs I've had to build a resume? Thanks, ...

View more questions Search