I tried to start my snowblower today and it wouldn't start. I decided to try the electric start, plugged it in, hit the start button and all it made was a spinny grinding noise. Unplugged it, and tried to start it manually with pull cord again. The cord would not pull without lots of effort and...

I have a Murray/Briggs 6.0 engine mower and the pull cord is sticking. It will stop after pulling about 4 inches. Then if I jiggle the pull cord it will extend another 4 inches. I can see a plastic piece that seems to be stopping it at every four inches. What is causing this and what is the repair...

I managed to remove the clutch rotary assembly which had a broken spring and need to be replaced. There is another item that has to be removed in order to remove the pull cord housing. Said item requires a wrench and must be turned counter-clockwise in order to be removed. The problem is that I...

My pull cord broke. Is the disassembly of this easy to perform to install new pull cord. THANKS, Ray

How do you replace the line on a weedeater trimmer?