Ask Experts Questions for FREE Help !
Ask
    ecbrein's Avatar
    ecbrein Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 20, 2012, 02:13 AM
    Ive got a Hoffman H6000 generator. When I start it the voltage drop below 110 V
    The voltage on the voltmeter reads 100 V. Sometimes it reads 22o V but after a while it drops to 100 V

Check out some similar questions!

When do I have to start to worry about voltage drop in a feeder? 200 ft? 500 ft? [ 1 Answers ]

I have run a sub feed to a 125 amp panel with 1/0 aluminum ser cable, 400 ft. This is a 120/208 volt single phase application. Is this o.k.

Voltage Drop [ 3 Answers ]

I am trying to illuminate a tunnel about 3000' long temporarily with 9- 400 Watt Metal Halide fixtures spaced about 320' apart. I have a 120/240 generator single phase that I will use to back feed a 240/480 volt transformer to deliver 480 volts, single phase to the tunnel lights. At 480 volts I...

Voltage drop [ 1 Answers ]

The Voltage will drop after 150 meter wire ,how to sole the problem . Thanks to all

Voltage drop [ 4 Answers ]

A 300sq mm cable is to be laid for 600mtr. Distance. As the distance is large so there are considerable voltage drop at the receiving side. How can we cope up with this voltage drop at the receiving end? We want a constant voltage ofd 415 V at receiving end irrespective of input voltage? ...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.