2005 Husqvarna YTH2248 riding mower w/ the BS intek vtwin 24hp engine will barely turn over (won't start) despite new battery. Sluggish. Will turn over a time or two and then stop. Tried jump-starting it off my truck with similar results. Any suggestions? Thanks.

The regulator burnt up so I replaced it, I can jump start it, but the blades only stay engaged for a few minutes and the voltage meter shows that it is not charging, also the battery is new, also the fuse is good

I've got a husky yth2448 w/briggs engine. Solved my air filter problem, rebuilt carb. Now it runs for 20-30 minutes and wants to stall. I have to pull out choke to keep it running long enough to get it back to garage. I replaced plugs, fuel filter and lines, oil, air filter. I am ready to drive...

Good afternoon all, I have a quick question that I am hoping someone can help me with. I have a Husqvarna yth 2448 that stalls when the engine is engaged after running for about 30 minutes. After the mower sits and cools off, it will cut fine again. I checked the seat sensor, not sure if that...

My mower stops cutting on its own, and will not start cutting again until started up again only to stop cutting again a few minutes later.:confused: :mad: :