Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
CHALLENGE drill bit set
[ 1 Answers ]
Hi, Today I bought "CHALLENGE Xtreme High Performance 300-piece drill bit set": http://www.argos.co.uk/static/Product/catalogId/1500001001/partNumber/7016248.htm I'm curious if anyone knows if Challenge have a website. There are a few drill bits within the box I have not used before and...
What kind of drill do I need to use to drill holes for 1 1/2" pvc plumbing.
[ 6 Answers ]
I'm running 1 1/2" pvc for a basement bathroom vanity and a wet bar. Do I need to get a Forstner bit or is just a regular hole saw best for drilling my 2x6 wall studs? Also, is 2" the correct size, or should I go to 2 1/8" or 2 1/4".
88 Civic Wagon: Bogging below 2500 rpm and hard studder and 4000 rpm.
[ 7 Answers ]
Hello all: I have a '88 Civic Wagon with 220k on a D15B2 (DPFI) engine. Just recently I have started having the problem above. Mostly once the car is warmed up. The car will choke, sputter, and try to stall even at full throttle below 2500rpm. After 2500 rpm the engine spins to life and runs...
91 Honda max rpm 3500 after warm-up
[ 2 Answers ]
91 Honda max rpm 3500 after warm-up While cold runs great; Main Relay barley warm 2 touch even w/ gray cover off (relay) ALL solder joints are shiny:rolleyes: It drives fine accels ETC... up2 3500 Help! :confused: View more questions Search
|