Ask Experts Questions for FREE Help !
Ask
    lowlandlassie's Avatar
    lowlandlassie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2008, 09:11 AM
    How to remove a battery from a snapper riding mower
    Hi,
    I', a wife with a un-handyman for a husband. I need to remove the battery from a older model snapper riding mower. Pleas help my grass is already about a foot and a half long.
    Thanks
    Lowlandlassie
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 21, 2008, 09:57 AM
    Usually on the left side of the mower below the seat is a black cover, pull out on each side at the top and rear edge of the cover. Underneath you will find the battery. On the right hand side you will find the solenoid.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing The Belt on a Snapper Riding Mower [ 4 Answers ]

I need to know how I replace the belt on my Snapper SR1333 riding mower. I just purchased a belt and now I need to know how to change it. I thought it was a quick fix but I guess that's what I get for thinking. :)

Snapper riding mower [ 1 Answers ]

Can you tell me what to check on a snapper riding mower concerning it not moving forward but will move in reverse>

1985 41" Snapper riding mower [ 1 Answers ]

Just tuned up the old snapper for the summer.Changed the oil and spark plug,new blades, new battery patched up a rust spot and replaced the starter. This thing has never run better until I ran over a large runner that we put on the deck, my bad. The mower stopped running as soon as it picked up the...

Snapper riding mower [ 2 Answers ]

I don't have the user manual for my snapper mower. Need to know what the sparkplug gap setting needs to be. Model SR928 10hp 28" cut Thanks, Roy

Snapper riding mower [ 1 Answers ]

I made the usual error, I left gas in my mower over the winter. Then thinking I knew what I was doing I drained the old gas and refilled with fresh gas. BUT, not before I messed with the carb settings on the 8HP tecumseh engine. Now the engine starts but has no power under load. It barely pulls me...

View more questions Search