Ask Experts Questions for FREE Help !
Ask
    joisster's Avatar
    joisster Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 10, 2010, 01:37 PM
    How to overide the reverse switch on a troy bilt super bronco lawn tractor
    How to by pass the reverse kill switch when the pto is engage so I can cut while backing
    InfoJunkie4Life's Avatar
    InfoJunkie4Life Posts: 1,409, Reputation: 81
    Ultra Member
    		  
    #2

    Feb 10, 2010, 02:05 PM

    Hydrostatic or Tranny?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Feb 10, 2010, 05:36 PM

    Hi,
    It is a yellow wire that is unplugged and taped off. It will be somewhere at the shift lever be it either hydro or Transmatic. It just grounds out the ignition.
    Peace,
    Clarke
    InfoJunkie4Life's Avatar
    InfoJunkie4Life Posts: 1,409, Reputation: 81
    Ultra Member
    		  
    #4

    Feb 10, 2010, 11:05 PM

    You should find the wire underneath on the left side near the axle. You should be able to just pop it off and tape it up like crigby said.
    troybilthiram's Avatar
    troybilthiram Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Apr 26, 2010, 06:20 PM
    Thank you guys VERY MUCH your advice worked... I just mowed for the first time with that mower this weekend and I couldn't stand not being able to mow in reverse without disengaging the pto... thank god I found that wire and unplugged it. And Yes I just tried it outside at 11 pm
    BarryE's Avatar
    BarryE Posts: 1, Reputation: 1
    New Member
    		  
    #6

    May 10, 2012, 08:23 AM
    What I hate is disengaging the blade. Shifting into reverse. Braking shifting into forward and then re-engaging the blades. All with my right hand which raised havock with my arthritic elbow. I'm going to try to find that wire on my mini-rider, sometimes called compack.
    raymond 5's Avatar
    raymond 5 Posts: 3, Reputation: 1
    New Member
    		  
    #7

    Aug 17, 2012, 08:20 PM
    Hydrostactic
    raymond 5's Avatar
    raymond 5 Posts: 3, Reputation: 1
    New Member
    		  
    #8

    Aug 17, 2012, 08:20 PM
    Quote Originally Posted by InfoJunkie4Life View Post
    Hydrostatic or Tranny?
    Hydrostatic
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy-Bilt Super Bronco 13AX60TG766 [ 2 Answers ]

Does anyone have a maintenance manual available for subject riding mower? Our RC club mower's drive pedal is now extremely hard to push down all the way. A helpful user on another forum suggested it may be the variable speed pulley hanging up. He offered advice on how to check this by removing...

Troy Bilt Super Bronco [ 1 Answers ]

Looking for a diagram of a Super Bronco deck. Had to replace a tension spring but don't think is in the correct place. The diagram in the manual isn't too clear on the springs placement. The belt is very loose and doesn't have the cutting power it used to.

Troy Bilt Super Bronco main drive [ 1 Answers ]

I have a Troy Bilt Super Bronco 42" deck rider, It has the veri-drive I believe it is called. Yesterday while mowing I had the drive pedal engaged and the mower just stopped and it started smoking from underneath the mower and wouldn't move in forward or reverse. It will go into gear(forw. And Rev)...

View more questions Search