Ask Experts Questions for FREE Help !
Ask
    stansam's Avatar
    stansam Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 26, 2010, 05:47 PM
    How to openup motor on a riding mower
    How to remove the shaft with two pullys so I can remove the plate to look inside
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Sep 26, 2010, 08:18 PM

    You have to remove the two pulleys .the shaft is the crankshaft it goes though the center of the pan .
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to openup motor on a riding mower [ 0 Answers ]

I started open up the motor and the plate stops from coming off because the pullys and shaft is in the way.how Can I remove the pullys from the shaft?

Briggs & Straton riding Lawn Mower motor (see July 4th Post for more info.)wont run [ 19 Answers ]

As recommend I replaced eh Diode but still having problems It now blows out the 12 amp fuse when I plug it in to the Alternator wire that connects to the main source that flows through the diode. With the wire that connects the alternator unhooked it does not blow the fuse. Could the main...

I need a mower deck belt for a Craftsman xls 1000 riding lawn mower. [ 2 Answers ]

I can't find a belt for my Craftsman xls 1000 riding lawnmower deck.

John Deer Riding Riding Lawn Mower Won't Start [ 9 Answers ]

Hello, I have a John Deer Riding Lawn Mower LX 173. It won't start. It ran fine last fall and I have a new battery on it. It will start with the help of starting fluid and run for just a second and then shut off. I found a hose disconnected on it but I'm not sure where it goes. It was laying...

Diagram for replacing lawn mower belt on Toro 1744HXL riding mower [ 1 Answers ]

I need a diagram for replacing the belt in the mowing deck of a Toro 17-44HLX riding mower

View more questions Search