Ask Experts Questions for FREE Help !
Ask
    nrk12pm's Avatar
    nrk12pm Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2009, 03:07 PM
    How oldis this snowblower?
    I have a model #2407 20" self propelled snowblower. It was distributed by J C Penney. It has a penncraft logo . Any help would be greatly appreciated. Thanks, Ken.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Oct 11, 2009, 08:46 AM

    Hi,
    Those machines are particularly hard to find any cross reference to because of multiple vendors making equipment for JC Penney.
    If you give the number off the engine, I can possibly help.
    Peace,
    Clarke
    nrk12pm's Avatar
    nrk12pm Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 11, 2009, 09:34 AM
    Old Snow Thrower
    Thanks Clarke! Here's more info I found on the snow thrower. Lambert SS-4. Engine-Penncraft Model 100252-0356-01. It's a 20" self-propelled single stage. I would really like to know how old this thing is?
    Attached Images
       
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Oct 11, 2009, 11:01 AM

    Hi,
    That third number, the Code has the date of manufacture built into it. Best I could find from Briggs put the engine as 1983, but it was not reliable.
    I do not believe that Lambert cover came from that machine, but is a "recycled" part. Paint color is always a clue. Lambert made snowthrowers, but I could not verify they did for JC Penney.
    Peace,
    Clarke
    Pattyrick's Avatar
    Pattyrick Posts: 2, Reputation: 1
    New Member
    		  
    #5

    Nov 8, 2009, 08:21 PM

    I have a PennCraft 2407, 16"auger, 12" impeller, 5hp Tecumpseh, white with blue lettering. I researched it a few years back and believe it was from 1971-72
    Pattyrick's Avatar
    Pattyrick Posts: 2, Reputation: 1
    New Member
    		  
    #6

    Nov 8, 2009, 08:26 PM
    Correction mine is the model 2416
    zxhollywood's Avatar
    zxhollywood Posts: 2, Reputation: 1
    New Member
    		  
    #7

    Nov 15, 2009, 07:49 AM

    Hi, I picked up a dated snowblower... its kawazaki green and has the crusader name on it, its powered by a 7 hp tecumseh... its late 60's-early seventies I'm guessing. The only info I found is that it may be an old mtd... but still very little info... it looks like this... but green. I can find the engine parts fiche no problem,. but I'm seeking info on the unit itself.. for parts or manual. Any info is gretaly appreciated.
    Tyvm
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snowblower not getting gas [ 7 Answers ]

I have a craftsman 536.886120 snowblower that will briefly start up than stall repeatedly. I will use primer and will start again for a few seconds then die out like it is not getting gas to carb

Snowblower [ 2 Answers ]

My Craftsman smowblower starts fine, but whe I pull the handle back to start the auger it makes a screaching break sound and kills the motor.

Snowblower [ 3 Answers ]

826 toro snowblower drive was working now stopped??

How can I fix my snowblower [ 1 Answers ]

I put the wrong mix on the snowblower I have a 2 cycle craftsman gas. I put more oil then gas tried dumping someof the gas out so I can put more in. at first the engine was turning now it won't even start. How can I fix this problem

Old snowblower [ 1 Answers ]

I have an old Toro 826 used snowblower that was given to me. I cannot start it. I bought a new spark plug, filled the gas tank, even put a little bit of gas where the spark plug goes. I still can not start it. Can someone please help me?

View more questions Search