Ask Experts Questions for FREE Help !
Ask
    heyhelpmeplease's Avatar
    heyhelpmeplease Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 29, 2008, 03:53 PM
    How do you replace the trimmer line on a weed whipper?
    I have a small electric black and decker that was given to me with broken line and no instructions.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Jun 30, 2008, 04:16 PM
    Remove the head, using about fifteen feet of line, wind in the direction of the arrow on the spool and keep it taut. Feed ends through the part still connected to the shaft, tighten up and go.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Weed Trimmer(weed eater) [ 3 Answers ]

I need step by step help on re-installing a (recoil) starter rope on a weed eater. If by chance you have diagram of how to put it on , I sure would appreciate it , any info will be appreciated ty denise

Weed Eater Trimmer [ 1 Answers ]

I have a Weed Eater brand yard trimmer that will start but will not stay running what will fix this problem

Replacing trimmer line on a weed whipper. [ 1 Answers ]

How do you replace the trimmer line on a weed whipper?

String Weed Trimmer [ 1 Answers ]

I have string weed trimmer - model is Weedeater XT 12, which I inherited, therefore no owners manual. I need to put new string on. I got the cover off, but can't figure out how to load the string so it feeds correctly. Help!

Weed Eater trimmer [ 4 Answers ]

The gas motor on my weedeater became unstable in it's running. After trying to readjust the carb I noticed the gas line was cracked and leaking at the tank. So I have now replace the gas line, cap, and cleaned the filter in the gas tank. Also have disassembled the carb and cleaned out the gas...

View more questions Search