Ask Experts Questions for FREE Help !
Ask
    pontiac020's Avatar
    pontiac020 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2011, 12:59 PM
    How do you replace rubber tire on wheel
    The rubber tire around wheel split I need to relace the rubber so how is this done on model #HS35
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Jan 24, 2011, 01:03 PM

    And what sort of thing would this #HS35 be?


    Split rims are simply unbolted and the tire/tube replaced and bolted back together. Except for Truck and heavy equipment split rims I wouldn't recommend messing with unless you have the proper safety equipment.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #3

    Jan 24, 2011, 01:05 PM

    What make is a HS 35 ?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #4

    Jan 24, 2011, 01:08 PM

    You will have to take it in where its warm.
    Put it in hot water and let it get soft then push it on.
    Some times it can be tough , unless you have a press, Luck
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is it imperative that a new wheel bearing be used to replace the old one? [ 3 Answers ]

It is for a Honda Accord with rear brake drums. I know that with some car parts its better to buy new rather than from the auto wrecker.

How to take a drain out of a bathtub to replace the rubber ring seal [ 2 Answers ]

I think the tub is leaking from the drain and waters leaking downstairs I want to replace the rubber o ring seal in the drain

Snapper riding mower: how do you replace the rubber driven disc? [ 0 Answers ]

How do you replace the driven disc (it is the rubber tire bonded to rim part # 7053103) on a Snapper riding mower model # 2811523BV? Please give as much detail as possible on how to replace this part. Thank you!

How to replace rubber paddle snowblower [ 6 Answers ]

I have a 1989 Aircap 21 inch snow thrower that needs the rubber spirals for the auger replaced. Each spiral has about 6 screws and a pin like mounting piece. The screws come out easily but I haven't figured out how to remove the pin. I've tried (gently) to pry it out but it doesn't want to move and...

Wheel/tire upgrade [ 2 Answers ]

My 07 mazda3 I Sport came with 15" wheels, I would like to upgrade to 17's. I read somewhere that this particular trim model will not accept anything larger than 16"(something about the brakes). Can anyone confirm?

View more questions Search