Ask Experts Questions for FREE Help !
Ask
    rjabski's Avatar
    rjabski Posts: 3, Reputation: 1
    New Member
     
    #1

    Aug 6, 2011, 06:56 AM
    How do I remove a starter on a B&S engine model 311707 Type 0132-E1?
    I want to remove the starter from my B&S engine, Model 311707, Type 0132-E1. What is the best way to do this?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Aug 6, 2011, 10:19 AM

    Is the engine mounted to a mower or a tractor at present? If so, which one?
    rjabski's Avatar
    rjabski Posts: 3, Reputation: 1
    New Member
     
    #3

    Aug 8, 2011, 03:41 AM
    I thought I replied to your question, but perhaps it didn't get through. The engine is on a Sears tractor, Model 917.270671. Hope this is enough information // Richard
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Aug 8, 2011, 09:44 AM

    The starter is right next to part #81. After disconnecting the battery and then the cables there should just be 2 bolts holding the starter to the engine. http://www.searspartsdirect.com/part...dMod=917270671
    rjabski's Avatar
    rjabski Posts: 3, Reputation: 1
    New Member
     
    #5

    Aug 8, 2011, 11:43 AM
    Thank you. I thought it might be necessary to remove the ring gear, Key #726. If I get your response correctly, the starter should just drop down after I unscrew the two bolts that support it. // Richard

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove a starter motor from a 2003 ford f350 with 6.0 diesel engine [ 1 Answers ]

I have a 2003 F350 6.0 diesel. I cannot get access to the top bolt on the starter motor to remove it for replacement... any suggestions?

What is the torque of the headbolt for engine 311707-0132-E1 [ 1 Answers ]

What is the torque of the headbolt for engine 311707-0132-E1

Engine Size & Type? [ 3 Answers ]

My previous Tenant has left behind an engine block and all I know is it's a V8 with a oil filter called "BALDWIN B6". I'm just wondering what size and type of engine it may be.

B&s 17hp 311707-0132-e1 [ 3 Answers ]

Will idle but stalls under load (white smoke june1 3:07 for details)anybody know where I can get online specs/diagrams for hd gasket&valve lash. Thanks Hc


View more questions Search