Ask Experts Questions for FREE Help !
Ask
    truckpatch40's Avatar
    truckpatch40 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 3, 2012, 07:53 AM
    How to change drive belt on troy bilt riding mower on a model 17AF2ACP011
    The belt on this mower is worn out and I need to replace it, how do I take it off and replace it. The drive belt on a 22hp v twin hydrostatic 50" mustang zero turn radius mower. Thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 15, 2012, 11:37 AM
    Hi,
    I will attach a link to the parts breakdown. The deck and its belt must be removed first. Once done the idler arm that tensions the drive belt has a square hole designed for use with a 3/8" ratchet or breaker bar. Insert said tool and rotate the idler arm to remove tension so belt can be removed and replaced. Link at:
    http://www.mowerpartsweb.com/MANUALS.../769-03560.PDF
    And the idler arm is pictrured on page 2 while the belt is on page 14. To get the manual with the directions, take this link:PDF Manual Web Archive
    And insert your model number and use 1 as the serial number. It is 769-03559 and you should refer to page 29.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to change drive belt on troy bilt pony riding mower [ 2 Answers ]

How do I change the drive belt on troy bilt riding mower

Troy bilt 18 hp riding mower uppper drive belt and transimisson belt replacement [ 0 Answers ]

I replaced the drive belt and transmisson belt and the clutch/brake pedal will not work when the mower is in forward. The mower will move forward when idling without pressing on drive pedal. Anyone know what it could be?

Drive belt replacement for Troy Bilt Riding mower model #13AN779G766 [ 4 Answers ]

Does any one know how to properly replace a drive belt on a Troy Bilt Pony model # 13AN779G766 The trouble I am having is getting the belt on the pulley that is attached to the rear diff. anyone's help would be good. Thank you

Changing Drive Belt on Troy Bilt Riding Mower 21HP [ 1 Answers ]

I saw a previous question from cosmokramer about routing the belt on a troy bilt mower. I have a similar question for a troy bily riding mower 21HP model # 13AT609G76637747. How do you install a drive belt for this model? Is it the same as the answer to cosmokramer where you remove the cover? ...

View more questions Search