Ask Experts Questions for FREE Help !
Ask
    samsan812's Avatar
    samsan812 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 2, 2012, 07:01 PM
    How can I troubleshoot a blown rear end(?) on a l120. Won't move
    ? Did I blow the rear end? l120 John deere will not run under power. Cannot push even once disconnect bar is piulled. Belts are all in spot to input shaft.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Aug 6, 2012, 01:08 PM
    Hi,
    Is the freelwheel rod still connected? Is the park brake on(even if apparently not?) There ar YouTube videos on repair, or a step-up to a different transaxle.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2001 mazda tribute rear door won't open [ 1 Answers ]

Rear driver door won't open from inside or outside have took panel of everything appears in tact and working.

John deere L120 starts won't move forward belt seems too loose [ 2 Answers ]

Recently, I repaired a flat tire on my mower. After replacing the wheel, the machine will not move forward or backwards. The engine starts, however, when I engage the pedal to move the mower, nothing happens. The wheel cotter key is in place, and the rod that has to be engaged in the rear of the...

Chevy C1500 rear end [ 4 Answers ]

I've got a Chevy C1500 with a 10 bolt, 3.08 ratio rear end. It's a 2WD, 5.7L engine. I want to swap it with something with less mileage. Probably a later model. Is there a compatible rear end even if its not the same ratio?

Red dots on rear end. [ 8 Answers ]

For some reason lately I've been getting weird red bumps on my behind. Some days they hurt and look like pimples that have come to a head but most times they are just red dots. Does anyone know what this is and how to take care of it. I've never had acne problems or anything like that. Could it be...


View more questions Search