Ask Experts Questions for FREE Help !
Ask
    DEB1112's Avatar
    DEB1112 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 30, 2009, 12:12 PM
    Honda Harmony self propelled does not self propell
    A 10 year old Honda HarmonyII ,great machine has lost power propelling.
    I don't believe it is belt driven. Owners manual shows nothing about propelling.
    Help.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 30, 2009, 04:30 PM

    Hi,
    Some of the Hondas had a driveshaft. It was made to be the piece that failed. It can be replaced with virtually no tools. There is a cover over it, I think it is two screws. It has rubber accordion boots at each end that must be eased out of the way. Beneath them are C-shaped thin spring clips, or spring clamps with ears(which require a pair of pliers.) Moving those inward on the shaft will reveal a hardened pin at each end that can be eased out with most anything roughly its size(it is merely a slip-fit.) The clips are moved to the new shaft if it does not come with replacements and the pins reused for the same reason. Boots back and cover back place and you are done.
    That does not mean that is what you have; you provided no model number. With it you ca n go the this site and look up your parts:
    Plano Power Equipment Online Store - Common Parts for Honda Lawnmowers by Model Number
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda Harmony II [ 3 Answers ]

I have a Honda mower which usually works just fine, one pull, no problem. Last fall I drained both the oil and gasoline for winter storage, it was working fine at that time. Now, after being stored for the winter I'm having a problem starting it. Of course, I've added new oil and gas and... ...

Honda Harmony 1011 Clutch or Transmission [ 2 Answers ]

I have a Honda Harmony 1011 that recently just stopped moving but the engine is still running. The drive belt and blade belt are fine. The brakes stopped working about a month before that then tt started making a noise and just stopped. I was told that it was probably something with the clutch...

Honda Harmony Mower - Blade Removal [ 3 Answers ]

I wanted to put a new set of blades on my Honda Harmony mower. I am having a difficult time removing the old blades. Any suggestions?

View more questions Search