 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi, I have an 13hp briggs and stratton ride on mower and it has no spark.
Hi, I have an 13hp briggs and stratton ride on mower and it has no spark. I have removed the black kill wire and cranked the engine and still no spark. Does that mean the coil is faulty, or could there be a problem inside were the stator is? Also the two wires going into the stator the red has battery, but what should the white wire have?
|
||||
Check out some similar questions!
I've disabeled all the safety switches, the engine turns over fine and I've isolated the ignition armateur (unplugged the ground wire from it.) the old one had spark on one lead but not the other so I figured it was bad. It ran sometimes but other times it would not start. Now that I bought a...
Hello, Im rebuilding a COX ride on mower With a 11hp Briggs And Stratton Engine on it. The Engine will not start. This is what I've done: Clean the carby All is fine and is in good working order, Took the head off all valves and piston work and are not damaged, Has a great spark, Fuel line is...
My threads are knackered on the end of my flywheel for the pull start is there any way to bodge it up even if it means welding a bolt on the top just to hold the flywheel on:confused:
Help needed please I have a hayter ride on mower with a 13 briggs stratton engine .it will run OK without the air filter and breather pipe connected but as soon as I refit the air filter ,plug rubber breather pipe in place and then it won't start .if I put my thumb in the breather it won't run .I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
