Ask Experts Questions for FREE Help !
Ask
    chachi's Avatar
    chachi Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 16, 2006, 03:32 PM
    Need help whacking my weed
    I have inherited a kawasaki kbl26a weed eater with the home I'm renting now and cannot figure out how to load the nylon. Got any leads for fixing my weeds?
    fredg's Avatar
    fredg Posts: 4,926, Reputation: 674
    Ultra Member
    		  
    #2

    Mar 17, 2006, 09:34 AM
    Hi,
    Thanks for posting a question here, and Welcome to the site.
    I'm not familiar with this particular brand. But, if you look underneath the cutter, you should see something that you can turn, like taking the lid off a jar with your hand. Normally, there is either a nut to use a wrench, or a larger type hard plastic knob, that you can loosen with your hand.
    Best of luck.
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #3

    Mar 17, 2006, 09:46 AM
    I found a diagram of the assemply here:

    http://www.buykawpower.com/kmcb2c/Me...historyDepth=2

    You can use that site to find a local dealer who may be able to show you how to change the reel. There is a Service Manual, but it appears you need to order it.
    chachi's Avatar
    chachi Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Mar 17, 2006, 11:24 PM
    Thanks for the post scott problem solved!
    J
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #5

    Mar 18, 2006, 05:26 AM
    Glad to assist
    fredg's Avatar
    fredg Posts: 4,926, Reputation: 674
    Ultra Member
    		  
    #6

    Mar 18, 2006, 05:41 AM
    Hi, chachi,
    I am glad you found a solution. Hope you have some good weekwacking fun.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Weed Eater [ 6 Answers ]

I have a WeedEater Featherlite Plus trimmer. I have had it for about three years. It has worked wonderfully well, until the last time I used it, and even then it ran. My problem is that the last time I cranked it, the rope did not retrieve, or get pulled back in to where it is supposed to be. ...

Mtd Weed Whacker [ 3 Answers ]

I have a MTD weed wacker that just won't start, it does on the first attempt and shuts off after about 5-10 seconds max. after that it won't start at all. I put the proper mixer ration of gas and two in one oil, and I have also changed the spark plug. Any suggestions, thanks!

I think weed tore us apart.. [ 8 Answers ]

My ex is 19 and I'm 17 and we were together for what would have been a year on June 1st. We broke up a month ago today and it seems like all I want is for him to think of me too (not that I know if he does/doesn't). Our break-up was mutual because we were negatively affecting eachother. I was...

Weed problems [ 5 Answers ]

I live in a manufactured house in a park and we have areas of stone beds that we try to keep weeded,is there any inexpensive liquid or granuals to help eliminate them? I have a layer of some kind of plastic under the stones.

Weed Eater [ 1 Answers ]

I have a Weed Eater Featherlite. I bought one of those replacement heads for it. How do I get the old head completely off?

View more questions Search