Ask Experts Questions for FREE Help !
Ask
    Daddybraz's Avatar
    Daddybraz Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 25, 2010, 10:32 AM
    Have a starter for a briggs. Won't start engine but spins great when off mower
    Have a starter for a briggs. Won't start engine but spins great off mower. Any suggestions
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Apr 25, 2010, 11:45 AM

    What model do you have and what size briggs.
    Could be nedds valves cleanance adjusted,this will cause a engine to turn hard. Pull the spark
    Plug(s) and see how fast it turns.
    Daddybraz's Avatar
    Daddybraz Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Apr 25, 2010, 01:07 PM
    Quote Originally Posted by DG View Post
    what model do you have and what size briggs.
    could be nedds valves cleanance adjusted,this will cause a engine to turn hard. pull the spark
    plug(s) and see how fast it turns.
    I removed the spark plug and it still barely turns the engine over. Im at work and I don't have model number with me.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Apr 25, 2010, 05:51 PM

    Hi,
    Starter may be partially shorted or the contacts in the solenoid may be damaged. Either or both would do what you describe.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

20 hp Briggs and Stratton engine won't start -TroyBilt mower [ 4 Answers ]

I have a Troy Bilt riding mower and it won't start. The battery has been checked. I think it's the starter. Anyone know how to change the starter?

Briggs mower engine clanks and won't run [ 1 Answers ]

I have a B&S model 310707 engine in a riding mower. It was running fine . I shut it off and the next time I tried to start it it revolved about 3/4 ways around and went CLANK! Wouldn't move any further. When I backed the engine by hand and did it again , it went CLANK again and stopped exactly...

Briggs engine on MTD riding mower won't start [ 1 Answers ]

Hi. I have a problem with a Model 600 series MTD Lawn tractor. I can get it to turn, and it will run a bit with ether sprayed in the carburetor neck. I know this points to a fuel issue, but want to troubleshoot the kill switches. I believe there are three in this model, One on the seat, one on...

14.5 Briggs OHV engine won't start [ 7 Answers ]

My Ranch King rider has this motor on it. Last weekend I tried to start it and it smoked really bad and when it did start it ran for about 30 seconds then shut down. I have the crankcase to be full of gas. I pulled the head thinking it was a broken ring but the cylinder wall looks great. After...

Murray 12.5 Commercial Mower - Briggs Engine - Won't Start/Turn [ 3 Answers ]

So I'm mowing my back yard with my Murray lawn tractor. I brought it back to the garage and parked it, went inside to cool off, and when I went back out to put it back into the garage, it wouldn't start. I turned the key, and got nothing. The lights work, the battery is charged to 100%,...

View more questions Search