 |
|
|
 |
Junior Member
|
|
Nov 17, 2009, 06:52 AM
|
|
Have a Poulan ML# P015538
When I try to start it it turns over real slow some time you have bump the key back and fourth for it turn over have charged the battery also the wire to the starter as well as the started are very hot to touch what could be wrong!!
|
|
 |
Outdoor Power Equipment Expert
|
|
Nov 17, 2009, 10:00 AM
|
|
Hi,
With the info given it is either a valve adjustment problem or a starter headed south.
Peace,
Clarke
|
|
 |
Junior Member
|
|
Nov 17, 2009, 10:41 AM
|
|
What goes wrong for the valves to need adjusting
|
|
 |
Outdoor Power Equipment Expert
|
|
Nov 17, 2009, 11:32 AM
|
|
Hi,
I assume it is an OHV engine. As the engine breaks in, the rocker arms and the associated pivots seat and cause the valves to have too much clearance. Most engines require only one adjustment within the first 60 hours. The YouTube video makes quite the rounds here as it works quite well, even if "not by the book." It is:
YouTube - Lawn Mower Repair Valve Adjustment
Peace,
Clarke
|
|
 |
Junior Member
|
|
Nov 18, 2009, 04:51 PM
|
|
That's what I think needs to be done cause I took the spark plug out and the motor spins freely thanks a lot I'll post back tomorrow with update!!
|
|
 |
Junior Member
|
|
Nov 24, 2009, 07:01 AM
|
|
Worked great I have a murray I'm going to try the same thing on!!
|
|
Question Tools |
Search this Question |
|
|
Check out some similar questions!
Poulan rider
[ 2 Answers ]
I need to know if someone would have a diagram for a poulan 42" deck,I can't remember how too put my belt on.
Poulan mower
[ 1 Answers ]
I need a dipharm on how to put a ground belt on a poulan riding mower
New Poulan Weedtrimmer
[ 1 Answers ]
I would like to purchase a new Poulan P1500 Weed trimmer. I am looking for this particular trimmer to replace and would also like to know the MSRP. Thank You
Poulan mower
[ 3 Answers ]
I have a poulan riding mower that will not start. I have put in a new air filter, spark plug and battery. There is a cable that is on the side, not sure what that goes too. Is it to the fuel line is so how do I fix it, if not why won't it start.
Poulan PT17
[ 3 Answers ]
I have a Poulan PT17 trimmer. I want to replace the head with heavy duty plastic blade. How do you remove the head to put on the new. I cannot see any screws, bolts that hold the head on, how do you remove it? :confused:
View more questions
Search
|