Ask Experts Questions for FREE Help !
Ask
    Dbaker888's Avatar
    Dbaker888 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 15, 2012, 04:38 PM
    I have a craftsman LT1000 with a Briggs and Stratton 16.5hp ohv engine. While mowing
    I then checked out the fuel system which was flowing fine. It started again but then 10 minutes later it did the same thing, spit sputtered and died. HELP!
    jsfocke's Avatar
    jsfocke Posts: 310, Reputation: 37
    Full Member
    		  
    #2

    Jun 16, 2012, 05:51 AM
    The first and easiest thing is to check the vent hole in the gas cap. If it is clogged it will cause these symptoms. If that doesn't do it the engine may be overheating. You will have to remove the top cover of the engine and make sure the cooling fins are clear. Mice love to get up in there and nest.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

MTD 14.5HP 42" (Briggs & Stratton OHV) [ 5 Answers ]

I have an MTD 14.5HP 42" that has a Briggs and Stratton OHV engine. It is about 10 yrs old and has been sitting out for a couple years because I no longer had much of a yard to cut with 3 kids worth of stuff in back. We bought a new house that has 2 acres so now I need this again but I do...

Craftsman lawn tractor with Briggs & Stratton 18.5 HP OHV, Inteck engine [ 23 Answers ]

Howdy, My craftsman lawn tractor has served me well for many years now with nothing more needed than checking the oil and putting gas in her... so I guess I'm due. Anyhow, I'm not so great with diagnosis, but I can change parts if I know what's wrong, thus this post... I'd just filled...

Craftsman lawn tractor with Briggs & Stratton 18.5 HP OHV, Inteck engine [ 4 Answers ]

Engine worked fine last week and for 3 minutes after start this week. Then the engine sound changed. Itd made sounds like metal balls banging around inside. Now it will not start / turn-over. Just the sound of metal balls banging around inside the top of the engine. Any ideas on what the problem is?

Briggs & Stratton 14.5hp OHV - Won't Run [ 8 Answers ]

I have a yard machine mower that was running great. It shut off in the middle of cutting and that was that. If I pour gas in the carb it tries to start, so I know I have fire. I have plenty of gas going to the carb and the solenoid on the bottom is working fine. I had the carb off, took the main...

View more questions Search