Ask Experts Questions for FREE Help !
Ask
    tableclocks's Avatar
    tableclocks Posts: 383, Reputation: 2
    Full Member
     
    #1

    Jun 16, 2018, 09:17 AM
    Harbour freight 18 volt drill charger
    Will a 18 volt batter charger, from harbour freight charge my 18 volt porter cable batterys as long as I have the + and - hooked up correct? Thks richard
    ma0641's Avatar
    ma0641 Posts: 15,681, Reputation: 1012
    Uber Member
     
    #2

    Jun 16, 2018, 11:08 AM
    It should. However, some chargers are only for LION and other Ni Cad, others both. Worth a try. Need another 18 Volt PC drill?
    cdad's Avatar
    cdad Posts: 12,688, Reputation: 1438
    Internet Research Expert
     
    #3

    Jun 20, 2018, 02:48 PM
    If your depending on the porter cable equiptment to function then consider getting that style of charger for it or check pawn shops for a used one.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Jun 21, 2018, 06:10 AM
    Many Batteries and Chargers seem to have 3 Connections, Believe the third may be used to sense Heat. At least what it looks like when you change the Internal Batteries.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I use1300ma charger instead of a 500ma charger [ 5 Answers ]

Hi, I have a Jump starter for my car which get charged when required with it AC adaptor output on charger is 12v dc 500ma 8watt, problem is this charger is faulty (no output) was going to buy a replacement charger with interchangeable jack ends it has an output of 12v dc and up to 1300ma, is this...

Obama: Drill, Brazil, Drill! [ 11 Answers ]

Words fail me...

480 volt transformer step down to 120 volt or 230 volt [ 1 Answers ]

AC Axial Fan: run on 120 or 230 input volts / Rated Currect .061 or .053 / Input Power 7 or 6 watts. Supply voltae 480. Need a step down transformer / 480 to 120 or 230 volts.

What kind of drill do I need to use to drill holes for 1 1/2" pvc plumbing. [ 6 Answers ]

I'm running 1 1/2" pvc for a basement bathroom vanity and a wet bar. Do I need to get a Forstner bit or is just a regular hole saw best for drilling my 2x6 wall studs? Also, is 2" the correct size, or should I go to 2 1/8" or 2 1/4".


View more questions Search