Ask Experts Questions for FREE Help !
Ask
    e28335's Avatar
    e28335 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 1, 2011, 03:36 PM
    Genie Door Opener Open Problems
    Genie door opener closes door fine. Problem with opening door. It stops 1/2 way then creeps up the rest of the way. Why is it creeping?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Dec 1, 2011, 04:31 PM
    Pull the emergency disconnect rope and raise and lower the door to see if it is binding. Back to you

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Old Genie Garage Door Opener - Gear and Sprocket [ 4 Answers ]

We have an old genie model SP99 garage door opener. The motor stills works, the plastic gear still turns but the door will not open or close without assistance. Could the chain sprocket 'slip' when the gear is turning? When giving assistance the chain does move down the track like normal to it's...

Genie 88 garage door opener [ 0 Answers ]

I have the same problem as everybody else,the door opens about 6 in. and returns right back. After reading all the forum , I performed eveything suggested with no success. What is the problem? Can it be the starter module? Or what else? Thanks Gardoor

Garage door opener remote won't open the door [ 1 Answers ]

My remote won't open the garage door. Wall mount will open the door, but continues to blink. Suggestions

Genie pro 88 garage opener won't open completely and won't close [ 1 Answers ]

I have screw type genie pro88 model.It does not have sensors mounted at each side of the door.The door only open half then the door stopped (I have to hold the opener's bottom all the time).If I press the bottom again, the door go down couple inches then go forward couple inches. If I press it...


View more questions Search