Ask Experts Questions for FREE Help !
Ask
    highsea's Avatar
    highsea Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 28, 2013, 08:44 AM
    Generators problems
    My one of the generator is showing high ampere than the other one. The high amps is approximately 240 amps then the other generator.

Check out some similar questions!

Residential Generators. [ 1 Answers ]

Permanently installed standby generator. 1) are ground rods required at the generator? 2) can you use type SER aluminum cable to feed the panel?

Generators [ 3 Answers ]

What size generator would be needed to run home of 1800 square feet? What size for lighting only? min. rpm's (on generator)for each application? Torque required to started this generator? Torque required to keep it running?

Champion generators [ 1 Answers ]

My generator got covered with mud and water now it will not handle a load what should I look for to fix this problem?

Portable Generators [ 2 Answers ]

I have a Coleman Powermate Generator 6250 that a couple of weeks the ON/OFF switch Went bad (rocker type switch,hung in middle).Parts for Powermate generators or hard to Find as I understand that went out of business.The question is the old switch had three Terminals L(-) with wire attached 3(-)...

Portable generators [ 2 Answers ]

I know there are a few threads about this but I wanted to clarify the answers for myself. First of all, we live in an area that has a high water table. I also heard the power goes out quite frequently. If that happens and our sump pump isn't able to work... well our basement will be in about 3-4...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.