Ask Experts Questions for FREE Help !
Ask
    redbird791's Avatar
    redbird791 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 7, 2012, 02:11 PM
    Fluid ejection
    I have aa Intek 17.0 hp on a Scotts S1742 riding mower. When I turn the key some kind of fluid squirts out the rihjt side near the oil dip stick. The motor doesn't turn over it just shoots out this fluid.It looks as though there is a fitting with nothing attached to it. What is my problem?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Mar 8, 2012, 06:31 AM
    This is a guess , could be your oil drain.. not sure.
    But pull spark plug and see if it cranks ,crankcase could be full of fuel.gas may have leaked through carb ans mixed with the oil.This would keep it from cranking.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Brake Fluid Has Been Getting Lower in the Fluid Cylinder. Is Failure Imminent? [ 6 Answers ]

Hi, All! I was told by someone, who is not a mechanic by trade, that my brake fluid was getting lower in the fluid cylinder and that I needed a brake job. There don't appear to be any leaks, my brakes seem to work fine and there are no noises. He made it seem like brake failure was...

Do I need to remove some of my AT fluid before adding transmission fluid conditioner? [ 1 Answers ]

I bought a 20 oz. bottle of "lucas oil automatic transmission fluid conditioner" for my 93 ford taurus 3.8L V6 automatic GL. It has 145,000 miles on it. I want to add a 20 oz. bottle of this lucas oil transmission fluid conditioner but don't know if I should remove some of my AT fluid before I...

Ejection system [ 2 Answers ]

I am planning a basement apartment in my home. It will have a kitchen sink and a full bath. In the future I may add a washing machine. I' m looking for a recommendation on a pumping system for the waste water. The vertical lift is about 8'. I would like to get a unit that will last a long time as...

Ejection Pump [ 6 Answers ]

Pump is not ejecting the water through the line. I pulled it out and cleaned it:mad: but when I fill the basin and the floater rises it will not eject the water. Suggestions please.

View more questions Search