Ask Experts Questions for FREE Help !
Ask
    acmayo's Avatar
    acmayo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 5, 2016, 07:09 AM
    Electrical output on genset welder 3ph
    Hi , I have a genset 300 amp engine driven welder which has 110v 220 v and 3phase sockets . The welder itself has stopped workng but still has these aux supply working . I see two sets of output wires from the generator and the smaller set is for the sockets and the larger for the welder , across the weld wires supply I'm getting 36 vac and they are goimg on to large back plane and each one seems rto have a large diode to rectify , after that I'm only getting 3 or 4 volts dc . Would one of these diodes be able to pull down the voltsge ?
    Many thanks
    Al
    InfoJunkie4Life's Avatar
    InfoJunkie4Life Posts: 1,409, Reputation: 81
    Ultra Member
    		  
    #2

    Sep 18, 2016, 02:35 PM
    Al, can you post any pictures of the backplane and supply generator? Include diodes.

    Also any model numbers you find.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Controlling the output of an electrical appliance [ 2 Answers ]

I have an electrical heater with three separate elements, which each use 1133 Watts, so the entire appliance is rated at 3400 Watts, 240 Volts, 15 Amps. I would like to reduce the output of the heater. Would it be safe to simply remove two of the elements, leaving one running, to turn it into a...

Can I hook up my welder to my generator the generator has a 4 wire plug my welder is [ 0 Answers ]

Can I hook up my welder to my generator the gen. has a 4 wire 240v plug welder is 3 wire?

Boosting electrical output over long distance wires [ 9 Answers ]

Thanks for your assistance in advance! I live in a rural Cambodian setting without electric service from town. We decided to have a wire run from town through the local power company. It is a black wire undoubtedly of low quality made in Vietnam or China. It is the one used in town. The...

How to convert 208V, 3ph to 240V, 3ph [ 1 Answers ]

How to convert 208V, 3ph to 240V, 3ph

To get higher wattage output in a lower output fixture. [ 1 Answers ]

We purchased a Harbor Breeze fan with light fixture, but did not see that the wattage output was only going to be 40 watts. We need more lighting in our room. We have tried bigger watt bulbs but the fixture starts to blink and then goes dim(back to the 40 watt output). How can we change that?

View more questions Search