Ask Experts Questions for FREE Help !
Ask
    bernicelaredneck's Avatar
    bernicelaredneck Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 15, 2007, 03:46 PM
    Drive belt replacement for Troy Bilt Riding mower model #13AN779G766
    Does any one know how to properly replace a drive belt on a Troy Bilt Pony model # 13AN779G766 The trouble I am having is getting the belt on the pulley that is attached to the rear diff. anyone's help would be good. Thank you
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jul 15, 2007, 04:16 PM
    You must fully depress the clutch/brake pedal to get the belt on. If there is also a tensioner pulley it too must be retracted. This is going to take about 6 hands so go buy a six pack and call your buds.
    redmolly's Avatar
    redmolly Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Sep 1, 2010, 05:09 PM

    Anyone know how to replace the drive belt that runs from the engine to the rearend ? On a Troy Bilt model 37746 13AJ609G766 1A094H20024
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #4

    Sep 10, 2010, 07:45 PM
    Berni take
    The nut off the diff pulley installe belt on it first then put it on the other pulleys
    Attached Images
     
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #5

    Sep 10, 2010, 07:52 PM
    Red molly
    You will have to remove the top belt off the variator.
    Then remove yhe secondary belt.you will have to loosen the bolt that rus through the variator.
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy-Bilt drive belt, brakes and shifting [ 2 Answers ]

Troy-Bilt Z809H, 24 HP B&S engine, 46" deck, 3 years old, model 14az809h063. I just had the drive belt replaced by an "authorized" repair facility. With the engine off, everything seems fine. I can shift into and out of gear easily and the brake stops the tractor cold. With the engine running,...

Troy bilt lower drive belt instalation [ 4 Answers ]

How do you get the lower drive belt around the belt keeps to get it on the crankshaft pulley?

Troy-bilt riding mower drive problems [ 5 Answers ]

I have a troy-bilt riding mower and it sometimes gets stuck in gear and wants to keep moving whether it be forward or backward. I can put on the break and it still won't stop. I just had new drive belts put on. Could this have anything to do with it. If not what could be causing this to happen?

Troy Bilt Riding MOwer (Bronco) [ 4 Answers ]

Hi, I have a troy bilt riding lawn mower (42 inches deck) bought last year. I am looking to put a bagger with chute on it. Do you know if a Craftsman bagger ( 6 Bushel 2 - Bin Hard Bagger for 42" Deck ) will fit? I know all most of the available mowers in the market are built by MTD, do the...

Troy-Bilt riding mower quits [ 2 Answers ]

My 1997 troy-bilt mower quits running when I disengage the break and/or engage the mower. I've been told it was a safety switch. Any tips..

View more questions Search