Ask Experts Questions for FREE Help !
Ask
    sinnedennisf's Avatar
    sinnedennisf Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 18, 2008, 10:09 AM
    Drive belt replacement ?
    Mtd 16.5 drive belt replacement how do I put on a new one ?
    sinnedennisf's Avatar
    sinnedennisf Posts: 2, Reputation: 1
    New Member
    		  
    #2

    May 18, 2008, 01:53 PM
    This belt was broken, on my mtd 16.5 riding mower,you take out the battery and the plate under it you will see a pulley ,I put a screw drive in the hole to hold it in place , you use a 7/8 socket and turn it count clock wise to get the nut off and then the pulley will lift, I then put the new belt on both pulleys and use a short 2/4 to push the larger pulley back in place . Total time was about 1 hour.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Poulan/Weedeater lawnmower drive belt replacement [ 1 Answers ]

I need to replace the drive belt on my Poulan/Weedeater lawnmower. Does the cutting blade and engine have to be removed to put on a new belt? I would like to see a diagram if one is available.

Murry 42 lawn tractor drive belt replacement [ 1 Answers ]

I have a murry 42 inch lawn tractor, modle#425303X92, need info on how to change the drive belts, look like the deck will have to come off to gain excess. A belt diagram would help or instructions. Thanks... Jake101

Tractor drive belt replacement [ 1 Answers ]

How do I replace a broken drive belt on my 42" Troy Built tractor

Poulan drive belt replacement. [ 7 Answers ]

I am wondering if you could send me a picture containing drive belt replacement of a poulan 14.5hp, 42 inch cut lawn mower. Thank you

Small drive belt replacement [ 2 Answers ]

Murray rider mower. Drive belt broke. Purchased replacement belt. Do not have a diagram for installing the belt but put on one way and could not engage the clutch couldn't stop without killing the engine. It seems like there is only one other way to put the belt on with v in groove and flat...

View more questions Search