Ask Experts Questions for FREE Help !
Ask
    pamhar's Avatar
    pamhar Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 22, 2007, 02:25 PM
    Cub cadet steering wheel removal
    I was wondering if any one knew how to remove a steering wheel from a 1200 cub cadet.
    We are having problems getting it off. Please help
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
    		  
    #2

    Mar 22, 2007, 09:13 PM
    Have you removed all visible signs of attachment and can not get it off shaft? If so, soak with a penetrant overnight and apply gentle even pressure from the center of the wheel, not the outside, it will break. There may be a tool available through cub.

    Don
    Ironpedlar's Avatar
    Ironpedlar Posts: 8, Reputation: 2
    New Member
    		  
    #3

    Mar 23, 2007, 06:24 AM
    I recently removed the steering wheel from an old Murray. After removing the roll pin that held the steering wheel in place on the steering shaft I clamped two pair of vice grips on the steering shaft as a way two keep the shaft from turning. While I held the vice grips another person turned the steering wheel back and forth to losing it on the shaft. Yes, we shot penetrating oil between the two. It finally loosened enough to remove with quit a bit of effort.

    Randy
    ctblaster's Avatar
    ctblaster Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Oct 5, 2010, 04:56 PM
    Try the 5 in 1 cub cadet steering wheel removal tool from www.jzfab.com
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cub Cadet engine cuts out when PTO engaged [ 2 Answers ]

Model 2415, engine cuts out when PTO switch is engaged, OR, when simply taking it out of park and pressing on the forward pedal. Any ideas? Thanks!

Cub Cadet 1200 [ 3 Answers ]

Hi guys it's me again! I recently traded around for an older Cub Cadet 1200, seems I over looked some problems but am happy over-all with my trade. My question is what does it mean when 1st starting the engine it smokes blue for a couple of minutes and then clears up. Valves? Rings? It...

94, camry, not smoothly torque the steering wheel [ 2 Answers ]

94, camry, in driving sometimes the steering wheel is not smoothly torqued when it turns Large angle. I have to use an extraordinarily large power on the steering wheel, and feel That it not runs smoothly, like some blocks existence. Please give me some advices. Thanks.

Steering wheel and key locks [ 2 Answers ]

Hi, My brand new 2006 Toyota Matrix (which I really enjoy) started giving me problems when I try to turn the key on, it stays locked. I also noticed that my steering wheel is also locked like when you turn it and the car is off. It's the second time it does this to me. It is not the normal...

Tilt-wheel steering wheel problem [ 1 Answers ]

On my 1998 Buick Park Ave the tilt-wheel will no longer change positions. A couple of days ago I got in the car, adjusted the steering wheel and heard something Pop. Since then, the steering wheel will only stay in that position. Does anyone know how I might go about fixing this problem? ...

View more questions Search