Ask Experts Questions for FREE Help !
Ask
    cstewart's Avatar
    cstewart Posts: 1, Reputation: 1
    New Member
     
    #1

    May 6, 2008, 10:23 AM
    Craftsmen DYT 4000 motor
    Has anyone had any problems with their DYT-4000 engine? They say that I need a new motor $1800 which is almost what the tractor cost new
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    May 13, 2008, 04:44 AM
    What about doing a "short block"? Could save you quite a bit of $.
    nomi840's Avatar
    nomi840 Posts: 1, Reputation: 1
    New Member
     
    #3

    Jun 2, 2008, 09:26 AM
    Quote Originally Posted by cstewart
    Has anyone had any problems with their DYT-4000 engine? They say that I need a new motor $1800 which is almost what the tractor cost new
    I have also had problems with the engine on my DYT 4000.

    Two weeks after the two year warranty was over the engine blew up. I tarted the engine once morning and it started up fine. I rode the mower from the back yard to the front yard and turned off the mower. After I moved some stuff around... rakes, shovels... I started the mower again and it made a strange sound. I turned off the mower... checked the oil levels and then tried to start it again... this time the mower started but immediately made some very bad noises (like metal breaking) and it stopped. I opened the hood only to find that the engine casing had a big gaping hole in it. When I opened the engine it was destroyed inside... everything was broke... the upper engine case, the lower engine case, the counter weight, the push rod... everything!

    I need a new engine also so I am interested in knowing how you resolved your issue.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman DYT 4000 [ 2 Answers ]

Oil spits out of fuel pump screen

Benefit of bldc motor compare with pmsm motor or blac motor [ 1 Answers ]

in the name of god hi every body what is benefit of brush less dc motor and brush less ac motor. And when we use bldc and when blac? What is different of them? I know that bldcs have trapezial emf and blacs have sin emf.

Craftsmen Auger Blade bent 24' [ 1 Answers ]

Hi all, I am an old Snow blower C950-52109-0 , I have bent the blade on the LH auger. I have taken the 6 screws out on both sides. No luck. How do I replace the blade. Eveything else works OK. Please help Snow storm tomorrow and day after Vivek:)

Craftsmen lawn mower [ 2 Answers ]

My lawn mower will not start; I changed out the oil... put new spark plug and new gas. Usually I can put a little gas in the carb. And it will start.. but now even that doesn't seem to work. Mind you it tries to start just seems it's not getting enough gas. Question 1: can I flood it by putting...


View more questions Search