Ask Experts Questions for FREE Help !
Ask
    bradleywatters's Avatar
    bradleywatters Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Aug 23, 2009, 09:33 AM
    Craftsman Weedeater Stops Running.
    I have a Craftsman weed-eater. It starts fine and idles OK but when you pull the trigger for full speed it stops running. Please help.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 23, 2009, 12:50 PM

    Hi,
    Saying you have a Craftsman tells little since multiple companies have made them. My guess is you have a Poulan/WeedEater with a clogged dutch twill inlet screen (that is the screen in the carb behind the pump cover - the cover with the one screw in the center.)
    With Craftsman model numbers are always helpful, especially with hand-held equipment.
    Peace,
    Clarke
    bradleywatters's Avatar
    bradleywatters Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Aug 23, 2009, 02:17 PM

    Thanks Clarke,

    The model # = 358.791070
    I look forward to additional info.

    BW
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Aug 23, 2009, 06:16 PM

    Hi,
    Your manual is available through Welcome - Managemyhome.com but is too large for my to attach here.
    I have attached a picture of a Walbro carb. It is editted for size, but #5 on the drawing is the inlet screen. If you are capable and want it I can look up the part number in many brands
    Peace,
    Clarke
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

42 inch craftsman mower stops running [ 2 Answers ]

I Have a 42 inch crafsrman mower that stops running every time I engage blade releasebrake or put into gear . What's going on?

Craftsman Weedeater won't stay running [ 5 Answers ]

I have a convertible craftsman weedeater that has run like a champ - until now! I can get it to run briefly, a few minutes at most, then it dies and will not restart. After reading some similar posts I am beginning to suspect either an in tank filter or the inlet filter on the card Sound...

Craftsman weedeater [ 2 Answers ]

My craftsman weedeater won't start. I have changed the spark plug, put all new fuel mixture, and placed the choke lever in the OFF CHOKE position; then pulled the rope to clear the engine of excess fuel.

Craftsman weedeater [ 1 Answers ]

My craftsman is a little hard to start, but when it does I give it fuel it stops what could be wrong and is it something that I can fix.

View more questions Search