 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman riding mower model 917.272201 can I use a 42" cutting deck instea of stock
I have a 25hp B&S ohv it stock had a 46" cutting deck well I got it from a friend for free without the cutting deck. I've got it going again and I can't find any used 46" mowing decks in San Diego ca but I have found a 42" mowing deck a few hrs away so I want to know if I get it will I be able to just slap it in like the original one? Thanks
|
||||
Check out some similar questions!
Myrider shuts down after approx 10-15 minuts of mowing. Cannot restart, have to wait 10-15 minuts. Will start, will mow for maybe 5 min, shuts down again. Possible defective fuse?
I need to replace the broken deck belt and I need a diagram to show me how
I stored the deck for most of the season. Now when I try to replace it, the belt seems to have shortened. If I put it on the drive pulley, I can't move the deck back far enough to reach the outward-facing pins. I've checked the routing of the belt and it seems fine. The manual says the belts are...
The gear shift works very hard, particularly since I adjusted the brake. Does the brake adjustment effect the gear shift? If so, is it as simple as readjusting the brake? If not, how do I get the gear shift to move more freely? Thanks!
Primary & secondary belt sizes craftsma 917.272201
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
