Ask Experts Questions for FREE Help !
Ask
    tambunga2's Avatar
    tambunga2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 12, 2007, 10:15 AM
    Craftsman Riding Lawn Mower won't start
    My tractor quit on me during my grass cutting. I have not been able to get it started. I've
    Changed the air filters, a new spark plug, a new solenoid, a new fuel filter, a new battery. When I put it on choke and try to start it, the engine turns but won't start. After that,all I hear is the clicking sound. I've removed the new spark plug, and found it to be a little wet.
    Do the new spark plugs already come set? The fuse is fine, but my headlights won't turn on. I'm open to any ideas as to what to check next.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 12, 2007, 10:55 AM
    The clicking indicates your have run your battery down or the sloenoid is going bad. Plugs frequently are factory gapped but should always be re-gapped before installation. They can get bumped around in shipping. Recharge the battery for several hours. Remove the plug but then reinstall the wire. Allow the threads of the plug to ground againist the engine block. Turn it over and see if you get a good blue spark. Back to you
    walterampey's Avatar
    walterampey Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Oct 9, 2014, 09:05 AM
    Try replacing the stator... because the headlights run off the power generated by the alternator... even if the stator doesn't appear to be damaged check for a damaged section in the solder run along the inside of the stator.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My murray 11hp riding lawn mower will not start. [ 1 Answers ]

I have tried all I know to try and still my murray 11hp mower won't run. I need to know if there are any more fuses besides the one by the celenoid. I replaced the battery, starter switch, celanoid, sparkplug, and 15amp fuse by the celenoid. Are there any more fuses that I should look for? ...

New Craftsman Riding Mower [ 1 Answers ]

We just purchased a new Craftsman 26HP, 54" cut, riding mower. One of the front wheels does not point straight ahead, it is pointing inward. When we called the help desk, we were told it was engineered this way so that the mower would make tighter turns. Is this true? (The steering wheel is...

Craftsman 20.0 electric start 42 inch automatic lawn tractor mower clutch [ 2 Answers ]

We have a Craftsman 20.0 hp electric start 42" mower automatic lawn tractor Model 917.270940 and it appears the cable that allows you to engage the blades has broken. How do you either fix this problem or do we need to purchase a new cable. If we need a new cable how is it installed... I need...

Craftsman 14.5 hp riding lawn mower [ 3 Answers ]

I bought it used it seemed OK,but now I have loss of power.I NOW have a brand new battery.What can I do to the engine or carburator to fix problem?How do I properly adjust carb?Should I overhaul the engine?I haven't found a rebuild kit for my B&S engine(14.5) Any help would be great.Somone told me...

Craftsman Riding Lawn Mower Warranty [ 4 Answers ]

I am planning to purchase a Craftsman 4000 Riding Lawn Mower, and am wondering if it is worth the money to purchase the 3 year extended warranty? Can anyone advise?

View more questions Search