Ask Experts Questions for FREE Help !
Ask
    Molly68's Avatar
    Molly68 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 14, 2011, 07:01 PM
    Craftsman Lawn tractor is running on one cylinder only,how do I troubleshoot this?
    It's a 2004 Craftsman Gt model 917 276071 which recently quit on one clinder. No spark at he plug so I'm thinking ignition problem?

    Thanks
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    Sep 15, 2011, 08:18 AM
    There are two coils one for each cylinder, so if no spark replace that coil . Its under the blower housing just follow the spark plug wire.
    Lick
    kohler222's Avatar
    kohler222 Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 7, 2012, 10:15 AM
    Quote Originally Posted by DG View Post
    There are two coils one for each cylinder, so if no spark replace that coil . Its under the blower housing just follow the spark plug wire.
    Lick
    I have a similar problem. I replaced the coil, still no spark. Any ideas?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Lawn Tractor - Unable to Start Tractor [ 4 Answers ]

Hello, I currently having difficulty starting my Sears Craftsman Lawn Tractor, (Model# 917.259830). I was using the tractor and had to shut it off to move a lawn hose. When I tried to start it again it just clicked. Specifically upon turning the keying, it makes a click sound followed by a whin....

I have a Murray lawn tractor... I would like to replace the cylinder sleeves. [ 1 Answers ]

My Murray lawn tractor is a 14Hsp B/S, 42" deck, model # 287707, Type: 0225-01, Code :9310274A. I understand that some of these came with cast iron cylinder sleeves. I want to change mine out to get better performance from my mower.

Craftsman Lawn tractor model 917.273130 will not continue running [ 1 Answers ]

When I jump start my tractor , its starts with no problem. But when I remove the jumper cables, it dies immediately.

MTD Model 820 Lawn Tractor twin cylinder 46 Inch Deck [ 1 Answers ]

Was cutting the grass and the engine stopped. Tried to restart but cannot. The battery is fine, the oil was just changed, the gas is clean and fresh, the carburetor is clean, the air filter is clean, the choke works fine, the spark plugs are clean and dry. The enine turns but won't fire up.

Craftsman Lawn Tractor [ 3 Answers ]

How do I remove the blade carriage from the bottom of the mower?


View more questions Search