Ask Experts Questions for FREE Help !
Ask
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #1

    Mar 2, 2013, 11:24 AM
    Chuck Key
    Lost my chuck key for hammer drill. Purchased 1/2 chuck Key but it is to big.
    What did I do wrong. See specs
    Name 1/2" Hammer Drill
    SKU 94436
    Brand Drill Master
    Amperage (amps) 4.2
    Maximum speed (rpm) 2800
    Voltage (volts) 120
    Chuck size (in.) 1/2 in.
    Cord length 5-1/4 ft.
    Product Weight 4.25 lbs.
    Accessories Included Depth rod, depth stop, chuck key, side handle
    Warranty 90 Day
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #2

    Mar 2, 2013, 12:55 PM
    A good deal at Harbor Freight? Maybe that's why.
    Sometimes it's the people who type in the specs.
    I see errors on Home Depot's website all the time.
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #3

    Mar 2, 2013, 02:03 PM
    Thanks. After I purchased the chuck key from Lowe's. I found the original chuck key for the hammer drill from Harbor Freight . I broke opening the Lowe's packaging so I cannot bring the chuck key back.
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #4

    Mar 2, 2013, 02:13 PM
    But if Lowe's said it's 1/2" and it isn't? Next time you have to go anyway... they are good about returns.
    I
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #5

    Mar 2, 2013, 02:39 PM
    Different chucks use different keys, even if they are 1/2. That only determines the drill size, not the chuck.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #6

    Mar 2, 2013, 05:15 PM
    Hi,
    Just a linl to the page on Amazon that has some universal(multi) keys:
    Amazon.com: chuck key: Tools & Home Improvement
    Peace,
    Clarke
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #7

    Mar 3, 2013, 03:23 AM
    Yes that what got me the harbor freight said: voltage (volts) 120
    Chuck size (in.)1/2 in./ Cord length 5-1/4 ft. Anyhow I found the old chuck key for the 1/2 hammer drill. I tied it on the drill with wire So I do not lose it again.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Is it a key or ignition problem when I can't turn my key to start 1998 Honda Accord? [ 4 Answers ]

I stopped to get gas in my 1998 Honda Accord Sedan. When I got back into my car and tried to start it I couldn't get the key to turn at all. It's as if it was on lockdown. I tried to turn the wheels since sometimes I've had to turn the wheels for it to release the lock and start. That didn't...

Is it hard to change ecu and key code box in my 96 1.4 civic? Lost my key [ 3 Answers ]

Is it hard to change ecu and key code box in my 1.4 1996 honda civic , and it has an immobilizer what's really the best way to start my car immedietly

Excel 2007 shortcut key swaped & Up/Down key not working in edit mode [ 1 Answers ]

Hi, Recently I started using excel 2007. From last week I am faceing following problem Problem No. 1 Home and Ctr+Home have been swapped e.g. If I am in Cell D6 then by pressing Home I should go to A6 but now it takes me to A1 and if I press Ctr+Home then it should take me to A1 but...

While installing windows xp My key board f8 key not working to accept the agreement [ 2 Answers ]

While installing windows xp My key board f8 key not working to accept the agreement abd I don't have other key board any other solutions

View more questions Search