Ask Experts Questions for FREE Help !
    Crose93's Avatar
    Crose93 Posts: 1, Reputation: 1
    New Member

    Jul 25, 2008, 08:38 PM
    Carburetor removal
    I have a Weedeater brand lawnmower and I am trying to remove the carburetor to replace the diaphram, the local shop told me this would work. I have removed the 5 screws around it but is still won't come off. Am I missing something.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert

    Jul 25, 2008, 08:59 PM
    I think you have mis-identified the carburetor. I am not familiar with your particular brand but all small engine carburetors I have ever seen are held by two bolts or two nuts on studs. Carburetors do not have diaphrams as far as I know.
    gergeceffs's Avatar
    gergeceffs Posts: 1, Reputation: 1
    New Member

    Aug 17, 2008, 03:41 PM
    Should have 2 bolts above the fuel primer bulb

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

What type carburetor do I have? [ 5 Answers ]

I have a 7 HP Briggs and Stratton engine. Model 170702 Type 1211-02 Code 7205241 What I need to know is what carburetor this engine has. I just want to see if I can get this engine running. It has Sat for quite a few years. It is on an old PennCraft riding mower.

Carburetor backfire [ 3 Answers ]

17hp Kohler backfiring through the carb. Water was in the gas but now O.K.

Rebuilding carburetor. [ 4 Answers ]

I am getting ready to rebuild my carburetor on an 86 yamaha virago 700 and was looking for some pointers before I start... I've never done this before...

How do I install a carburetor? [ 1 Answers ]

:) Hi! I have a motorcycle and I am having problems with it. I need to know how to install a carburetor. I have a '86 Suzuki and I really need help with it. Thank you!:)

View more questions Search