Ask Experts Questions for FREE Help !
Ask
    rkbonds's Avatar
    rkbonds Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 8, 2008, 07:23 AM
    Briggs and stratton wiring diagram
    I have an 11 hp briggs and stratton motor, model# 252707 type# 0622-02 code# 87121911 that I am having to rewire completely. I have everything figured out except the lights and the charging system. I have 2 black wires coming out of the alternator one has more volts than the other but both are "hot" with the white connector, coming out of the connector on the other side (away from the enging) is one white wire and one black wire the black wire is the one with the diode in the line. I need a complete wiring diagram and have been unable to locate one, do you know where I can locate one or can you tell me where these wires are supposed to go.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 8, 2008, 05:37 PM
    Try the local briggs and stratton dealer, they may have a copy that they may sell you. I doubt they will just give it to you though unless you do a lot of business with them.
    rkbonds's Avatar
    rkbonds Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Apr 9, 2008, 07:22 PM
    Quote Originally Posted by rkbonds
    I have an 11 hp briggs and stratton motor, model# 252707 type# 0622-02 code# 87121911 that I am having to rewire completely. I have everything figured out except the lights and the charging system. I have 2 black wires coming out of the alternator one has more volts than the other but both are "hot" with the white connector, coming out of the connector on the other side (away from the enging) is one white wire and one black wire the black wire is the one with the diode in the line. I need a complete wiring diagram and have been unable to locate one, do you know where I can locate one or can you tell me where these wires are supposed to go.
    I tried the dealer and they were unable/unwilling to help. The engine is actually on an old Yard King lawn mower that originally had a 12 hp engine on it. Any other suggestions?
    SourPus's Avatar
    SourPus Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Apr 12, 2008, 05:34 AM
    Check the briggs and stratton site and see if they have a wiring diagram for your model. I found one for an older model.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #5

    Apr 12, 2008, 07:01 AM
    Have you already removed all wiring?
    rkbonds's Avatar
    rkbonds Posts: 3, Reputation: 1
    New Member
    		  
    #6

    Apr 12, 2008, 08:09 AM
    Quote Originally Posted by rkbonds
    I have an 11 hp briggs and stratton motor, model# 252707 type# 0622-02 code# 87121911 that I am having to rewire completely. I have everything figured out except the lights and the charging system. I have 2 black wires coming out of the alternator one has more volts than the other but both are "hot" with the white connector, coming out of the connector on the other side (away from the enging) is one white wire and one black wire the black wire is the one with the diode in the line. I need a complete wiring diagram and have been unable to locate one, do you know where I can locate one or can you tell me where these wires are supposed to go.
    Pretty much all of it. Most I have replaced because it had been cut and put back together in many places.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Wiring Connection on a Briggs and Stratton [ 2 Answers ]

I am trying to connect the wires on a ridding mower. The engine is from the 80's and the mower is from the year 2000. The problem is the mower frame has 1 wire going to the alternator and one to the armature. The engine I am trying to connect has a two wire harness from the alternator and one...

Briggs and Stratton Solenoid Wiring 14.5 HP Single Wire [ 1 Answers ]

Would like some help in securing the correct connection of the red solenoid wire (single) to the proper wire on harness from chassis. It is a 14.5 HP BS being wired to a Sears Chassis. Thanks in advance.

Wiring in 5 hp briggs and stratton [ 1 Answers ]

My problem is the wiring. When I took the ON and OFF switch wire off the magneto I would get a spark. When it was on I wouldn't. So what can I do to fix that. Is it just replacing the wires or what. Thanks.

Briggs and stratton [ 6 Answers ]

My briggs and stratton lawnmower was running great then started spluttering. Cleaned air filter changed spark plug still the same. Spark plug goes a sootie black colour in 30 secs. Also its pulsing badly with a bit of black smoke. Any help welcome ...

Briggs and Stratton 16.5 hp [ 3 Answers ]

My friend has a Briggs and Stratton 16.5 hp engine on a riding lawn mower. He asked me if I had ever seen one that leaked oil from under the flywheel. He said there are two holes under the flywheel that oil is seeping out of. I am totally at a loss of the holes he is referring to and therefore I...

View more questions Search