 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Briggs and Stratton 28N707
I have a Simplicity with the 14.5 B&S 28N707 engine. It quit running today, it is getting spark and runs when gas is sprayed in the carb. I am thinking either the fuel shutoff or pump. It is putting out a small amount of fuel when it turns over. Is there a way to test what might be wrong before I start buying parts.
|
||||
|
||||
|
Remove the carb bowl, remove the spark plug wire, lift the float and turn the starter key. If you pump is bad you will not get any fuel. If you get fuel then the carb is not allowing enough into the engine. Probably a good cleaning sostart by checking the needle valve and seat. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My husband has an MTD with a b and s 12.5. It has run weill with some babying for a while, now. One day he was running ti and he heard a loud POP , and that was the end. It has new solenoid, starter, bettery and a few other things . The key is it is GETTING gas into the bowl, but not going ...
I just got a 28v707 12.5 hp rider. It doesn't start but turns over almost excessively easily. I have a weak spark but no attempt to catch even with starter fluid. No seen problems with the flywheel or the key.
I have an older 16.5 hp Briggs and Statton riding mower,and have had the starter rebuilt. I was told that before I put it back on the mower I need to have "The Valve" turned or it would be pointless.My question is what valve needs to be turned and where is it located.I am assuming I would takr the...
View more questions Search
|
