Ask Experts Questions for FREE Help !
Ask
    hal2001bass's Avatar
    hal2001bass Posts: 3, Reputation: 1
    New Member
     
    #1

    Sep 21, 2007, 07:31 AM
    B & S 16hp Vanguard
    Need specs, mainly oil capacity.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Sep 21, 2007, 04:18 PM
    Usually it will be 48 oz.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs & Stratton 16hp vanguard [ 11 Answers ]

I have a simplicity mower (1998) with a 16hp vertical shaft vanguard v-twin engine (303777 1111-51). Yesterday, after running the mower with turbo bagger attachment (a little extra load on the engine), for about 20 minutes, I idled back the engine and it began belching large clouds of blue/white...

Briggs & Stratton 16 hp Vanguard [ 2 Answers ]

Hello all, I have a this 16 HP Vanguard motor that came on a Dosko stump grinder. My problem is that the fuel will weep into the block and fill my cylinders. It also drips out of some sort of metal intake line that has nothing attached to it. This intake does suck air as it will kill the engine if...

16HP B&S Vanguard V Twin won't start [ 4 Answers ]

Hi My 16HP B&S Vanguard V Twin won't start. There was a thing with wires at the bottom of the carb, but when removing the carb to check for a blockage, the wire snapped off. However, this does not seem to prevent the float chamber filling with fuel. There is fuel being pumbed from the fuel pump...

Briggs & Stratton Vanguard 16HP OHV No Spark? [ 3 Answers ]

Hi All, Seen several threads along this line but nothing that seems to help me. I have a Briggs & Stratton Model 303777 Vanguard (on a 1994 Snapper SR170 Rider). The engine turns over well, but will not start. I am not getting any "thump" when it turns. I am not hearing any clicking from the...

B&s 16hp engine [ 3 Answers ]

Hi. First time user so will get to the point. I have an older 16hp ROPER garden tractor with a 16 hp engine.I have recently put in a set of rings(std.) and changed to an electronic coil.I have also had the valves ground.Now begin the problems. I have a hard time getting the engine to...


View more questions Search