Ask Experts Questions for FREE Help !
Ask
    bradm's Avatar
    bradm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 10, 2009, 10:22 AM
    31A-3BDE799 linkage
    I have a craftsman 5.5hp snowblower, the engine is a tecumseh. The model # is 31A-3BDE799 and I need to know the governor linkage setting. I drew a picture but I have NO IDEA where it went, is there a picture or diagram someone could send me? It seems to be running a little off so I think I didn't put this back together quite right! Thanks.
    [email protected] Brad
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Dec 10, 2009, 10:53 AM

    Try this for a manual Find Product Manuals, Search Results - ManageMyHome.com or try Sears at Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears PartsDirect | SearsPartsDirect.com
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Dec 13, 2009, 01:05 PM

    Hi,
    Just to add a bit, the parts breakdown is at:
    http://www.outdoordistributors.com/p...)_(2005-2).pdf
    And a service manual is at:
    Tecumseh Small Engine Specifications
    Peace,
    Clarke
    clifton1's Avatar
    clifton1 Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Feb 12, 2012, 05:38 PM
    I have a craftsman snow thrower model # 247.88255.0 or #31a-3bde799 I replace the drive belt brand new from sears but the self drive doesn't drive the belt is very loose can you tell me what to do
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman model#31A-3BDE799 Snow Blower 5.5hp [ 8 Answers ]

The snowblower is two years old and when the bar to engage the auger is held down the auger will not rotate. Any ideas?

14.5 B&S OHV Carb linkage [ 3 Answers ]

I have an MTD Yard Machine with a B&S 14.5 OHV. I was given this mower a week or so ago by a "friend". It didn't run when I got it as it had been sitting for about a year. I freed up the motor and put a new battery and solenoid on it. I drained the gas and put some new in it and adjusted the...

B & S carb linkage [ 1 Answers ]

Briggs & Stratton carb linkage Need detail for linkage setup on 7 hp engine, including springs and control lever setup. Any suggestions on a source? Mojoo

Linkage needs adjusting? [ 3 Answers ]

I have a 95 wrangler. I am having trouble engaging first and reverse on a manual. You really have to shake the shifter to get it in gear. It only happens on 1st and R, is this a problem with my linnkage in my shifter.

View more questions Search