I have a Troy Bilt riding mower and it won't start. The battery has been checked. I think it's the starter. Anyone know how to change the starter?
Add your answer here.
Check out some similar questions!
12.5 briggs and stratton won't start [ 18 Answers ]
I'm rebuilding the engine on my murray, it's a 12.5 horsepower power built. I have a brand new starter and the solonoid was replaced about a year ago, but it just clicks when I turn the key, if I hook up the starter and try and turn it over the solonoid clicks multiple times rapidly then won't...
I can't pull the starter cord on my 10hp Briggs and Stratton Engine [ 6 Answers ]
I recently purchased a two year old 10 hp Troy Built wood chipper. I've used it for about 4-5 hours and recently had to add a little oil. I added the correct type as per the manufacturers instructions. It started up just fine and after 15 minutes or so I shut it off to empty the bag. Once the...
16 HP Briggs and Stratton won't Start [ 11 Answers ]
I was mowing the lawn a couple of days ago and the engine just died on me. I have good spark. I bought a new fuel pump and installed it but still no luck. I can squirt some gas in the carb and it will start right up, then die back off as the gas is used up. There is plenty of gas going through the...
Briggs&Stratton engine 121602 [ 3 Answers ]
OK, Dh and I are havig a slight disgreement about the mower. It is a Murray, sold under the Scotts brand in 2000, with a briggs and stratton 6.5 hp engine number 121602. Now, a cable broke, the one from the handle that kills it when you let go, and it sat outside for a month while we got the...
Murray 12.5 Commercial Mower - Briggs Engine - Won't Start/Turn [ 3 Answers ]
So I'm mowing my back yard with my Murray lawn tractor. I brought it back to the garage and parked it, went inside to cool off, and when I went back out to put it back into the garage, it wouldn't start. I turned the key, and got nothing. The lights work, the battery is charged to 100%,...
View more questions Search