Help! I just replaced the short block on this motor and I cannot get it to run. I've adjuseted both intake and exhaust valves to 0.004 at 1/4 turn past TDC and no luck. It cranks over and kicks back on the compression stroke with smoke out the carb. So far it has not kicked over at all yet. What...

Hi, I have a new Husquvarna LGT2654 (purchased March 29th) with the Briggs and Stratton Intek V-Twin. It's run fine until now. It's been extremely Hot & Dry in the Memphis, Tn. Area and it's been about 3 weeks since I had to cut the grass... Now it cranks and cranks but won't start. I...

Valve adjustment instructions for a v-twin briggs intek engine. Popping out of carb and impossible to start, runs good after starting. Very frustrating and undependable. Good compression new plugs, coils, filter but after reading I believe the compression release related to valve adjustment may...

I have a Poulan Pro mower with Briggs 25 hp V Twin Intek motor. This mower was left at a property I purchased so I do not know the history of how it stopped working. When I turn the key to start it the flywheel turns easily but seemed to have no compression, I looked in the cylinder through the...

My 25 HP Intek Twin Model 445777 Type 0134 engine with 47 hours, clean gas, oil and filters, started "racing," after one hour of mowing this week, blowing smoke. I've mowed three times this season; over one hour each with no problem. Choke now runs in "reverse," meaning that I have to push it all...