|
|
|
|
New Member
|
|
Apr 16, 2011, 09:46 AM
|
|
17 hp briggs and stratton
My 17 hp briggs and stratton will not start. I have taken off the starter and had it checked. It also has a brand new battery on it. It started now wanting to roll over last year and now if it does it is very weak if anything. Any help?
|
|
|
Ultra Member
|
|
Apr 16, 2011, 10:49 AM
|
|
When it hits the compression stroke does it stop ?
|
|
|
New Member
|
|
Apr 16, 2011, 12:05 PM
|
|
It never hits the compression stroke, when I turn the key it may start to turn just briefly and the not again.
|
|
|
New Member
|
|
Apr 16, 2011, 12:05 PM
|
|
Comment on DG's post
It never hits the compression stroke, when I turn the key it may start to turn just briefly and the not again
|
|
|
Ultra Member
|
|
Apr 16, 2011, 03:46 PM
|
|
Pull the spark plug out and see if it turns easy , if so you might want to look at the valves for proper clearance, if not have your starter checked.
Luck
|
|
|
New Member
|
|
Apr 18, 2011, 10:47 AM
|
|
Thanks form the help dg, it starts now.
|
|
|
New Member
|
|
Apr 18, 2011, 10:53 AM
|
|
Briggs and stratton
All of the gas is collecting in the carburator, I took the carburator apart and cleaned in with carb and choke cleaner. What else can I try to prevent the motor from flooding and rubnning properly?
|
|
|
Uber Member
|
|
Apr 18, 2011, 11:28 AM
|
|
Find out WHY its flooding and check the float level and check the needle valve and seat. It WILL run poorly if it leaks.
|
|
|
Ultra Member
|
|
Apr 18, 2011, 05:48 PM
|
|
What type carb is it gravity fed or fuel pump,what type unit is it on?
|
|
|
Ultra Member
|
|
Apr 18, 2011, 05:57 PM
|
|
Your welcome
What did you do to make it start ?
|
|
|
New Member
|
|
Apr 19, 2011, 12:40 PM
|
|
Comment on DG's post
It is gravity fed with an electronic float.
|
|
|
New Member
|
|
Apr 19, 2011, 12:42 PM
|
|
Comment on DG's post
Sprayed wd 40 around the wheel that connects to the starter teeth and replaced the cyliniod.
|
|
|
Ultra Member
|
|
Apr 19, 2011, 05:28 PM
|
|
Good job .
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Briggs and stratton 12.5 hp
[ 1 Answers ]
Have a 12.5 b&s motor in rider replac float/set needle in carb new filter also gas backs up into air filter and when I open gas shut off valve also leaking out of exhaust port/ any ideas what is going on? / Grass is getting longer
12 hp briggs and stratton
[ 1 Answers ]
My briggs and stratton won't start, jusy spins and backfires. Ive checked all I can think of. HELP
14 Hp Briggs and stratton
[ 1 Answers ]
I have a 14 Hp twin Briggs vanguard model#is 294777,And Im looking for the carb adjustment,can anybody help me w/that?
16.5 hp briggs and stratton
[ 2 Answers ]
I have an older 16.5 hp Briggs and Statton riding mower,and have had the starter rebuilt. I was told that before I put it back on the mower I need to have "The Valve" turned or it would be pointless.My question is what valve needs to be turned and where is it located.I am assuming I would takr the...
10 hp briggs and stratton
[ 1 Answers ]
I need to know what the intake and exhaust valve setting for a briggs and stratton generator.
Thank you :(
View more questions
Search
|